Changed the 0 and 5v setpoints and reads fine now

ok.... so where do I check/ change that in TP??
I'm using 12P on an 808 so the Pin I'm using is D8

have an issue with my WB O2 sensor doesn't seem to be reading correctly in Tunerpro. I have a 14point7 kit installed and the readout is around 1 unit out to what Tunerpro is reading. Wanted to check output range on the Wideband and input in TP to make sure that they are the same. I can remember read...

LOL.... tried everything else except that
cheers

Hi all

Just wondering if there is anyway of rotating the table graphs around in Tunerpro to get a better view at them from different angles? Often find that the tables drop down behind and can't get a good look at any spikes that may be there.

updated it to the latest oseplugin but still had no luck. Delete the plugin and TP fired up straight away. Tried it with all the older versions of the oseplugin and had the same resault. (didn't get past "detecting hardware") So from what you are saying that I should delete it untill I'm r...

no worries will try that and see how it goes

I updated everything to the latest versions about 1 1/2 months ago and everything was working fine when connected to the vehicle. Not sure if I had tried to open it off line since I last updated everything. I haven't had a chance to check to see if it will still open when connected to the vehicle ye...

Just wondering if anyone has had this problem with loading TP before? Was going to do some editing of a couple of tunes off line and go to load TP and it seems to stall on "Detecting hardware" and won't load any further?? Have tried reinstalling it but still gets stuck at the same stage.

OK, solved most of the issues that I was having.... 1. found that when I had repinned the ECU plug for the 808 there were a couple of wires that are the same colour and ended up up mixing 2 up and had the speedo and map sensor wires swapped around :oops: 2. found that some how the original 12P code ...