Seems fair. I'll PM some details after Bathurst....

Hey vlad,

Clearing out the workshop- found a pair of rear door 'seals'
Make an offer... postage will be a bit tricky due size.

Urrg, doing my head in. Trying to work out Injector flow rate mS/Gram for the AL3-F7A Checking the bin/xdfs for VS and VT V6s Shows 361.328 ms/gram for CKUL4113 VS V6 '793 injectors (20.21LB/Hr 207cc/min) 361.33 ms/gram for CXWL1932 VT V6 '777 injectors (21.44LB/Hr 219.35cc/min) 213.87 ms/gram for C...

You can test the fan with the command drop down at the very top right once TP is connected and talking. Choose turn on fan and to turn off there is another called set normal or something like that. That will allow you to toggle the fan at will. There is a bunch of other useful commands there too. W...

Wow, no hot air gun for smd soldering? , try a Halogen bulb....

[youtube]https://www.youtube.com/watch?v=aGSFZ2eadaA[/youtube]

Like vlad said, I had to use the pulley off my VP buick engine on my replacement ecotec pump... fits perfectly.

Thought it odd too. Sadly it was my only spare sorry.

Ahh, The L67 T5 VK Wagon. Its running rich, its waay of base tune now.. 10psi pulley, 39lb injectors, manual. I'm struggling to put into practise all I've read. The motor is running strong, puts in daily miles. But its off whack. I'll wire up the wide band, and do some fresh logs. I've bought an exh...

So a fun afternoon. Started off (again) determined to get my trusty TOP2007 ebay special programmer I've used for years on an old Win7 32bit desktop, on my newish Chinese laptop. A Chuwi Hi10... Dual boot thing. A year old now and performing well. Usually runs in Win10 mode, gagged to prevent OS upg...

And they are a dying breed, a dud Rubicon capacitor eventually leaks and usually screws the pcb. g612_damage.jpg The one I have here is previously repaired, and won't fire the injectors. So, it turns out 89-95 models use the same ecu, the later (and interchangeable) G618/630 won't fit Its a mitubish...

I PM'd the whole page.