thanks vs ss any idea is appreciated cause ive done as much as I can think of but this is my first project so Im no expert ill double check tacho.thanks

i know its weird but I don't much. all I can work out is its got inj pulse, power at dfi but no spark no power out of dfi which wiring dia says powers cas cam as .d9 at pcm should get 12v on ignition from cas but isn't. dfi's got earths which it supplys to cas cam a s which there getting dfi's not g...

led test lamp across inj terminal

still wont start got power going to dfi but no spark, no power out of dfi for cas.tried 3 dfi's all same.no cas signal at pcm.pcms got power, earth. thanks antus for help but im no mechanic im a house electrician.i can only check basic things with m meter t light etc.got inj pulse, power at dfi; doe...

thanks heaps pman92 ye ment iac not tps.ill go do what you suggest now got injector pulse checked across plug with t light checked fuel pressure.ill go see if dfi is getting what it should.thanks again pman.changed cas got 5v at pcm but notning at dfi.is it the 18x or 3x and should it be 5v also whe...

thanks guys for replys.its vs v6 got injector pulse power at dfi checked pcm with multi m its getting power, earth, signal from cas etc. all I did was move relays and fuses from engine bay to under dash.its an after market harness and its only got 6 wires going to the 2 engine wiring loom connection...

car was running hid wiring harness now no go cranks but that's it.no bcm or anything vs motor in a wb.thanks.

I know it's probably been asked before but i been searching al day and i cant find out what to do with the wires that went to bcm after vats removal don't need bcn now but don't know what to do with wire that went to bcm.thanks

cheers dylan

gday everyone need vats removed for vs v6 conversion any of you genius's near portmacquarie coffs harbour. if not will have to mail it. thanks heaps glen