Search found 964 matches
- Thu May 09, 2024 6:41 am
- Forum: Off Topic
- Topic: Trying to monitor the data bus with an ELM327
- Replies: 17
- Views: 463
Re: Trying to monitor the data bus with an ELM327
Universal patcher is configured to work with elm devices too, you can give it a go and report if it works or not. I have tested it only with obdlink device, so a cheap china crap device might not work as expected.
- Sat May 04, 2024 4:48 pm
- Forum: GM LS1 512Kbyte and 1Mbyte and newer
- Topic: Logger improvements
- Replies: 13
- Views: 810
Re: Logger improvements
At that point rpm start to drop[fuel cutoff], and time is not that long, between 2 events.
- Fri May 03, 2024 4:57 am
- Forum: GM LS1 512Kbyte and 1Mbyte and newer
- Topic: Logger improvements
- Replies: 13
- Views: 810
Re: Logger improvements
I got some log of crank relearn recently by some nice fellows around here. here is the basics monitor coolant and rpm. The threshold for running relearn is at least 80* C coolant temp, idle speed and park holding brakes., Than when conditions are met you send 6C 10 F1 AE 01 00 00 00 00 08 00 and sta...
- Wed May 01, 2024 7:51 am
- Forum: Engineering and Reverse Engineering
- Topic: quick question on powerpc code
- Replies: 3
- Views: 223
Re: quick question on powerpc code
First line loads a pointer to r3 Second line adds offset to pinter to r3, and than data from that offset is stored to r3. PPc code can use only 16 bit addressing and makes full address out of 2 commands I have another quick question, How to set up in IDApro r14-r17 registers with fixed values as in ...
- Tue Apr 30, 2024 5:47 pm
- Forum: GM LS1 512Kbyte and 1Mbyte and newer
- Topic: Logger improvements
- Replies: 13
- Views: 810
Re: Logger improvements
I can only suggest for functionality, GUI design is totally upto you. More RAM parameters, that are needed for tuning, scalars for table lookup, and more knock data. Mode AE command for realtime control, like AFR, spark, engine speed and so no. Some crank relearn logic will be great too. I have some...
- Sun Apr 28, 2024 9:12 pm
- Forum: Bosch ECUs
- Topic: E67 to T87/T87A TCM interface needed
- Replies: 85
- Views: 13824
Re: E67 to T87/T87A TCM interface needed
From utilities->patcher original file->select bin when bin is opened you can edit tableseek from settings->tableseek Than you can add an entry just like configuring an xdf with different options. the main difference is that except absolute address it uses tableseek string. You can seek absolute or r...
- Sun Apr 28, 2024 8:40 pm
- Forum: Engineering and Reverse Engineering
- Topic: T87a 10 speed Trans controller
- Replies: 35
- Views: 16450
Re: T87a 10 speed Trans controller
Virgin gm_bosch_t87a_bench_fullbackup_full_backup_20221122165010_int_flash.rarHere are some files to look at: Virgin T87A read, Allison Trans T87A read, un lo ck ed T87A read, un lo ck ed T87A flashed with different software... Are these unlocked obd patch bins and if so do you have a before and af...
- Sun Apr 28, 2024 8:36 pm
- Forum: Bosch ECUs
- Topic: E67 to T87/T87A TCM interface needed
- Replies: 85
- Views: 13824
Re: E67 to T87/T87A TCM interface needed
It wasn`t that hard once you know the pattern.
Found there is 2 main revisions of t43 code, not sure how to differentiate unless open in patcher, early style is labelled t43-0
later style t43
Found there is 2 main revisions of t43 code, not sure how to differentiate unless open in patcher, early style is labelled t43-0
later style t43
- Sun Apr 28, 2024 6:32 am
- Forum: Bosch ECUs
- Topic: E67 to T87/T87A TCM interface needed
- Replies: 85
- Views: 13824
Re: E67 to T87/T87A TCM interface needed
Did some changes to e38 tableseek file, and now it will find the TX and RX tables stored in OS for any e38 e67 bin. End of table is open, so user needs to figure where it ends, Usage will be for display mainly.
Extract file to XML folder overwriting previous versions.
Extract file to XML folder overwriting previous versions.
- Sun Apr 28, 2024 4:13 am
- Forum: Bosch ECUs
- Topic: GM Can info & knowledge share
- Replies: 1
- Views: 203
Re: GM Can info & knowledge share
9:BSCM,10:HBP,11:CGM,12:VDCM,13:BECM_A Here is some more to add to the list, I am sure there is correlation between number and ID on some GMW document, or they just got added on demand. No matter how long is the list last 2 are always.NumOfRxDevices and InvalidRxDevice , they always takes last 2 num...