Why would anyone use Kalmaker over TunerPro?

Updated injector dead time values with a nice chart from holley:

https://documents.holley.com/techlibrar ... achart.pdf

https://documents.holley.com/techlibrar ... tarev2.pdf

Includes other models

You should be able to find these 2 settings:

WideBand 0V AFR
WideBand 5V AFR

Put 9.52 in your 0V and 20 in your 5v

Hi guys. I need help with a condition i believed is known as Throttle crack or Tip in. Basically when the car is cruising at low speed with a closed throttle and i press the accelerator pedal a little the engine will gasp/surge a bit. I'm running 11p with a 424 on a 304 V8 Siemens 60lb injectors Tur...

I improved my wiring loom recently and it started running rich because the voltage increased from an average of 12.4 volts up to 13.8 volts. I just retuned it to settle it down. It wasn't immediately obvious to me what happened but the clue was right in front of me the whole time. Anyway go fix your...

Can you let us know where you got it from and some way of identifying it. The problem I see is there are so many variants out there in the market place no 2 are the same. Here are 2 i have bought from different places which have the same electronics on the inside: obd2-to-aldl.jpg Anything with the...

Thanks antus

I figured something went wrong with the update because as soon as I downgraded it worked instantly again

Here is a money saving tip. ALDL (OBD1) cables are selling for $65 but you can buy an OBDII cable for as little as $7 from aliexpress or ebay and easily modify it to work as an ALDL (OBD1) cable. All you need is: 1 x Piece of wire 1 x Diode (1n4004) Common and sold everywhere for around 20 cents The...

Anyone else having problems with OSEPlugin v.180 not working anymore with the latest version of Tuner Pro? It doesn't get listed anymore. 5.00.9816.00 (General Release) 05/12/23) Not Working/Detected 5.00.9813.00 (General Release) 05/09/23) Not Working/Detected 5.00.9786.00 (General Release) 02/06/2...

I'm running 11p on a 424 and want to tune the auto for drag racing. I was manually shifting and 1-2 is ok but it didn't want to manually shift 2-3 and cost me a lot of time. It seems the recommendation is to let the computer do the shifting. What do I need to do? I'm guessing I just tell it to shift...