G day all. Seasons greetings to all. As I have said before I am new to this is it possible to connect a 5wire wide band o2 sensor to the 808 or do I need to get one that has its own controller ?
Charlie

Thanks I thought that it would be something simple
Charlie

Working in tunerpro rt every time I try to open one the tables it is filled with hex reference I was trying to open the ve table have I hit a wrong tab by mistake I'm confused.
Charlie

This is the log that I recorded today

How can I reduce the idle fuel as it's running to rich to idle with out the idle screw wound in when I start it it's flooded and only clears when I crack the throttle and bring the revs up above idle say 1000-1500rpm for a minute that's cold start . Whent for a test drive this morning with the littl...

Going by the log that I recorded today the map was 53% at750 rpm How do I reduce the ve at idle will changing the timing do it or what prams do I need work on.
Charlie

Probably as I still have the idle screw wound in if I wind it back it stalls how can I reduce the idle fuel it's too rich it's fuelling up the longer I let it idle the worse it gets with the vacuum hose on and the iac out it runs the same there is very little vacuum at the iac hole. I took the air c...

Hi well took the iac out the stepper was working started the car with the iac out it idled the same removed the brake vacuum hose and as usual it picked up revs I plugged the iac in and started the car ad the plunger shot out now need reverse it back in. While it was running I blocked the iac hole w...

sunday log 0004.xdl sundaylog 003.xdl Had no power to the fuel pump so remove the drivers seat to check the relay what do you know there is power at the relay. What now hit the starter and its running idling sort of just for curiosity took the hose off the break booster and the revs increased and s...

Yep worked that out the car was running yesterday drove it 20ks from home turn it off then would not start trailered it home re loaded the bin now the fuel pump doesn't run at key on or after cranking when oil pressure comes upI mus have changed something checked the fuses got no power to pump