Ok thanx delcowizz
Might give them a wide berth then

Hey guys
Was having a look through a racewoks catalogue the other day and noticed they have 2 and 3 bar map sensors.
Just wondering what if anyone here has any feedback/ experience with them ?
Gotta be better than Ebay specials right

Ok cool cheers fellas

Ok cool thanx mate so all I need to do is adjust the fuelling and it will be ok ?

Hi guys Just wondering if you guys have had success with using the simulated narrowband signal from the spartan. Wired in my Wideband today and got nothing from the sensor. Realised I hadn’t removed the pull-up resistor (‘424’). Did that and setup the scalers 0v to 10 and 5v to 20. I pulled the wire...

Here’s a thread I did about speedo correction in a vr vs
viewtopic.php?f=32&t=4851&p=69041&hilit ... ion#p69041
Hope it helps

Ah cool thanx for the replies fellas
Thought super v6 ran a 3.5 bar pressure reg and the v8 were at 3 bar.
But if they are the same then all good I’ll just stick with the stock reg since it’s not that old.

Also I have supercharged v6 injectors to go in it aswell, does the v6 fuel pressure reg fit on the v8 rail? I know I will need to adjust the injector rate in the tune to suit, so I just got it running on the stock injectors coz I didn’t want to be mucking around with that stuff while I was getting i...

Hey guys Finally got the the motor rebuilt in my vr ss Specs are standard bore re ringed stock pistons VT roller block Camtech roller turbo cam 222 @50” in 227 @ 50” exp on 114 Lsa Motel tie bar lifters rebuilt heads with springs spring to suit cam. Will be upgrading pushrods and roller rockers soon...

Yeah I’ve had them in the car for ages using a couple of relays to turn on on or both but even 1 on by itself is so noisy coz it’s at full speed. I know how they are wired on fords but the Delco uses ground switching so just wanted to check that it will work whe way I’ve drawn it