finally got around to changing the OS and seems to have written with no issues just have to change all the calibration section to suit now [07:56:17:416] Validating 512k file. [07:56:17:429] Start End Stored Needed Verdict Segment Name [07:56:17:441] 00000 7FFFD A36B A36B Good Operating system [07:5...

Awesome I assumed that was the case have t done an OS swap on an 0411 and what I read hptuners is sort of hit a miss from what I gathered as well as being expensive to do just wanted to make sure thanks guys

12212156 is probably the most featureful OS for the P01. It would be a good choice. Please keep us informed! So you recommend using that over the 12216125 ? I as long as it can implement the flex fuel and do boost in the future (hopefully soon) that’s mainly what I’m looking for. As soon as I get t...

Thank everyone have added a notation mark on my trigger wheel if you look near one of the bolt heads there’s a small what looks like a pin hole but is actually tdc mark it will be pretty close with just bolting the sensor and trigger wheel up but may always need a little adjusting for tolerances

I have looked at that but I already have this pcm sitting here so figure I may as well use it and if all else fails i can always swap to it. Thanks for that info will make life a little easier

Sorry I can't help with the question about the OS. But do you have a drawing for the reluctor? Is that thing 3D printed? I ended up finding the pattern for the x24 trigger angles off of the Haltech website drew it up in Fusion 360 and 3d printed it for mock up before sending it off to get quotes on...

hey guys got a quick one for you im looking to change the OS on my P01 from 12225074 (2004 adventura) to 12216125 (2002 chev tahoe) im looking at using this OS as it seems to be the only OS with flex fuel supported unless there is another one anyone has cooked up that is capable? now ive gone and bo...

hey guys just looking for a bit of info on these pims. i want to try and get a pim paired to an e38 ecu for use of the cruise control functions i dont have any tools for normal programming of the pim but i can read the eeprom on the pim. if i set the vin and security code in the pim to suit the ecu ...

Thanks the1 that’s the exact diagram I needed and need to add that one to the vz wiring diagram sticky page. Thanks monaro308 that the one I used to get 90% of the way through it almost covers everything but it’s missing about 8 pins that are for random stuff.
Thanks again fellas

hi guys
just wondering if anyone has a complete pinout for a vz 6l e38 specifically the x1 connector as the wiring diagram jayme had posted has half of the x1 pinout in the wiring diagram im needing the rest of them.
thanks
Darren