Hi All I would like some help understanding the EOI spreadsheet or any help how to adjust the EOI. I have setup the transmission shift, PE and AFR. Its a VT V6 SC with The 1's enhanced bin. The Enhanced Mod General Information states "Simply enter your Intake Valve Duration 0.050” Spec into the...

Update -Thanks guys for your help in sorting this. I have replaced ABS module & everything appears to be working properly now, although after the upload of cal file with OS Flashtool I had errors appearing like before twice, I left it for a few mins & it connected fine, I have ordered your c...

HI Antus Tuner Pro RT gave me the details you said to look out for see image it was A5GE 1.3 VTV6 AT Realtim. I tried the flashtool again & rec a error msg again see image I then went into flashtool & the comm port appeared I retried flashtool & it brought up RT A5GE 1.3 VTV6 A PCM inste...

It has been running fine with the wideband I connected it 6 months ago approx April & it has been good until I started changing the Fuel inj multiplier & it got worse each time not sure if coincidence. I have run power for the heater from the battery via a relay but it sits below the ECU. Is...

I have your PCM NVRAM installed since about Feb 2018 with The1's enhanced bin & I modified transmission and fan temp settings, ADX - VT_V6_SC_$A5G_enhanced_v1.3.adx and XDF - VT_V6_SC_$A5G_enhanced_v1.3.xdf A 14point7 Wideband since about April 2018 all has been working well until recently when ...

Today I drove the car with ABS module unplugged but briefly the dash chimed & steering went heavy warning lamps came on & off but mostly was Ok & seemed to go a little better. I checked for ABS faults with plug reconnected & found 2 fault codes for the ABS 72 Data Fault & 74 Torq...

Thanks biggvl I have done that and took it for a short drive was OK will try again for next few days & see if it is all working and advise, Thanks

I am not sure & don't know how to tell sorry. I have still had problems in the last week with the dash warning lights randomly coming off & sometimes they go out and the steering is fine the car still runs ok though. I checked for the fault codes & have 3 of them 31 - theft deterent, 92 ...

Vehicle is now running with Std Enhanced bin file. I am still getting errors when connecting to vehicle with Tuner Pro & it won't connect sometimes if I leave it disconnected for 5 to 15 mins it will connect & then when I disconnect I seem to have the same problem trying to connect, it has o...

I have a series of events that has now caused me to be unable to start the car VT L67 Enhanced bin with NVRAM. I have uploaded a few Injector multiplier cal files with the flash tool & there seemed to be more problems each time. It started with errors trying to connect to the car & sometimes...