very cool stuff!

For T87/T87A, I have a lot of experience, if you want to dump flash .remap, programming, I think I can help you. I am a newcomer, I have been watching this forum for a long time, and my account has just been activated. :lol: :lol: I'm interested in this if you or anyone else is willing to help. Sam...

bummer...no .bin to .hpt

jk, thanks for making this

the older gen 3 stuff has a coast mode flag and then a seperate coast mode while braking flag. It might be that simple

Really great work! I'm very interested in the TCC control strategy for these 6l transmissions. I'm curious about how the tcm determines the slip rate when increasing torque demand on 2014+ trucks. steady state they hold a consistant slip rate but as the pedal is pressed the TCC slip increases but do...

2C FE XXXX Loads the FE DPID with the PID number xxxx AA04FE tells the ecm to send DPID FE at a fast rate (04 is for fast rate) ecu then starts sending 5E8 FE NN repeatedly Where NN is the pid data you can pack multiple pids into a DPID by listing additional pids one after the after so 2C FE XXXX YY...

the DPID data the ecm broadcasts will be under the ID 0x5E8. the scan tool will request mode 0x2c to tell the ecm what pid to put in what buffer, and then I think mode 0xAA is the scan tool request to start the data broadcast. I can clarify more if it's needed. mode 0x22 is the request for the ecm t...

universal patcher has the checksum calcs figured out for you already. see the t43 xml

that should be easy enough. you don't need to read the cluster. ipc hammer should have the stock files to start with. Find your calibration file, search for the service airbag message and replace it with what you want it to say. save the file and write it to the cluster with ipchammer. I don't even ...

setting up your r13 value will clean it up a lot