I got it fellas had to set an adx delay its now working:)

Ok so how do i set a delay in the adx? Im new to this so still learninn sorry if i ask obvious questions. And the vr auto data bus being noisy anyway to combat that ?

Ken is your sons car an auto? Now ive seen some replys im thinking it might be a bin error. Do i have to use custom memory mapping when writing the bin to the nvram?

So echo needs to be enabled in both prefrence windows and in adx edit tick the rs232 echo aswell?? How do you see a checksum problem?

Made my normal memcal have trouble getting bin from flashtool aswell it was my mistake ive only posted so no one else makes the same mistake i did. Nothing wrong with the lm-2 or nvram it was himan error

I never used the actual cig lighter attachment i just cut it off and hardwired it i moved the earth this arvo to under my centre console solved that problem also make sure no wires are near the bcm or ecu its an rfi interference when the nvram is connected itll make it throw error codes once i moved...

Ok so after installing my $11p nvram and scratching my head for 2 days i found that the lm-2 afr meter can cause interference. I had mine hardwired to the cig port the fix is simple you can use that power wire but must use a body earth well away from the bcm and ecu. Failing to do so throws error co...

Its the connection box where it says connected itll connect then be right for a few seconds then turn red data error goes on in this cycle till i stop connection ill be checking the aldl config tommorow aswell as double checking my xdf and associated files surely there is somthing ive missed or have...

Ok so installed my nvram in my vr ss auto downloaded the 11p package soldered the jumper wire as per instructions im using an envyous customs aldl cable for the logging now my issue is the nvram comnects etc to tuner pro rt with the associated xdfs bins and adx files loaded but i keep getting a data...

Im wanting to purchase and nvram for my vr ss auto sent vl400 a pm but not reply yet?