check out:

viewtopic.php?start=130&t=128&sid=fed1e ... 6dd5f71c2a

vlt304 has the firing order for the jackaroo DIS all sorted out for an intech which is the same 153624 as the RB30.

Fitted to th400 in hz with good clearance.

I was able to piece together a VL turbo flexidrive 90 degree drive and a th700 speedo drive to give me an output for both the cable speedo and a vn vss to go to my 808. I machined the th700 drive down to just the threaded nose and shortened the shaft to meet the flexdrive shaft. Seemed to go togethe...

Can anyone point me to a how to on using vecalc in tunerpro? I would like to log a drive then use vecalc to make bulk changes to my ve table based on target afr and wideband data.

Is there a write up in the faq or tuning guides? I can't find it but I may also be blind.

Thanks

File Name: Prem2022.bin Code Version: $12P Engine-Gearbox Type: VR 304 V8/TH400. Mods: Headstuds, LT1 valve springs Turbo - Borg Warner S366. 3.5" dump to 3" exhaust, 2 mufflers, screamer pipe FMIC, 3 bar map, Injectors: 80lb. stock fuel pressure reg 30psi ish base. Description: , it shoul...

VN inner wheel

it runs

Cheers antus, I'll let you know how it goes.

11

11