yeah its hard to know these days, i once found a picture of a trimatic part on ebay and it was my picture you will find on this forum :roll: :lol: one thing i can say from experience though, usually "knock off" brand stuff in a fuel system ends in tears! i've bought 044 bosch pumps i thoug...

i used to have a website that calculated what differences in diamater made, like 24mm to 26mm doesnt seem like a lot but its nearly 10% increase .... and then adding the rear to it changes it all as well. i personally have found too stiff in the rear without the front to complement it, just lifts th...

yeah nice result man!

the FX is almost back together after painting, so im trying to get more done on this thing, theres a couple of easy wins with it and a few harder ones .... but i want to get progress and get it registered maybe sometime next year before they outlaw registering anything thats not electric

oh yeah i forgot that bit of detail if you can access the logger you can get it into firmware upgrade mode, but in your case the button is the only option you have!

yeah the logger uses a teensy ++ 2.0 board, unfortunately NLA!

figured it was time to get this thread back onto the first page of the forum - only been 7 yrs since the last post! :shock: :roll: honestly the biggest change in this project up until recently has been me using it for testing delco stuff! .... i did find the exhaust bushes were split and no longer h...

one thing you could try is to re-upload the firmware....

also load arduino IDE and put the blink code onto the teensy just to prove if the teensy works at all ?

have you tried writing the current bin back in ?

I've had a bit of experience with logger screens, my person one the backlight failed, i was able to replace it and all good again, i've also had issues with no recording of logs, but in my case it was a new SD card and off it went, been looking at the same issue for Gareths logger, new SD card didnt...

delcowizzid wrote: ↑Wed Jul 31, 2024 6:47 pm Next will be some experimenting with a saab 2.8 turbo bin file
TurboX_1037395088_40RPCT00E.bin
hw 0261209382 sw 1037395078 ORI.bin
9-3_TurboX_XWD-1037395088.bin

interesting!