One thing I can tell you from past experience, once it hits full boost the torque stays pretty flat!

Didn't have torque on the dyno graph only HP and AFR so not sure on that one!

Ok so very exciting update (well for me at least) :punk: this has been a very long time in the making, kinda hard to believe the day has finally come! Its not totally finished, still fitting door locks and windows etc but all the body panels are on and its oh so close to getting tech inspection (hop...

yeah its hard to know these days, i once found a picture of a trimatic part on ebay and it was my picture you will find on this forum :roll: :lol: one thing i can say from experience though, usually "knock off" brand stuff in a fuel system ends in tears! i've bought 044 bosch pumps i thoug...

i used to have a website that calculated what differences in diamater made, like 24mm to 26mm doesnt seem like a lot but its nearly 10% increase .... and then adding the rear to it changes it all as well. i personally have found too stiff in the rear without the front to complement it, just lifts th...

yeah nice result man!

the FX is almost back together after painting, so im trying to get more done on this thing, theres a couple of easy wins with it and a few harder ones .... but i want to get progress and get it registered maybe sometime next year before they outlaw registering anything thats not electric

oh yeah i forgot that bit of detail if you can access the logger you can get it into firmware upgrade mode, but in your case the button is the only option you have!

yeah the logger uses a teensy ++ 2.0 board, unfortunately NLA!

figured it was time to get this thread back onto the first page of the forum - only been 7 yrs since the last post! :shock: :roll: honestly the biggest change in this project up until recently has been me using it for testing delco stuff! .... i did find the exhaust bushes were split and no longer h...

one thing you could try is to re-upload the firmware....

also load arduino IDE and put the blink code onto the teensy just to prove if the teensy works at all ?