Hmm yeah that xdf file is the worry i think. So assume that i can pull that data off the chip. If i can not find an exf what do you do then?

Is it possible that my memcal holden rodeo 2002 2.2 petrol would match to a similar holden astra xdf etc?

What do I have to do to be able to read the information off of my EEPROM to get my fuel and ignition tables? I am aware that there is a .bin file and you also need a .xdf file. I used tunerpro and opened up a random .bin file then opened up the matching .xdf file and I was able to see heaps of detai...

" probing the pin at the ECU for the ignition pulse."

Well it looks similar to some i have seen online. Coil charges up thats when the line drops down, when coil is charged up..., it fires off. The big spike is the highvoltage pulse ans collapse of the magnetic field. Then the horizontal line after that is the burn time of the spark. From here on i am ...

So I took this waveform shot when I was probing the pin at the ECU for the ignition pulse.

Does it look right???

I have, obviously over heated a Fet when I was removing it from a donor ECU to put into my ECU and the car did not start after I did the transplant. I have replaced a few other parts off the donor board and the car started and drove every time, sigh..... The part I need is called 55199. It's like 2 ...

I have another ECU here from the wreckers that I want to use in my car. It has the rfid key thing, has a ICU box at the steering wheel area that the key anntenna plugs into. Then it goes to the ECU and if you have the correct key it will allow you to start the car. How can I bypass this so that I ca...

When mosfets fail apparently the fail pretty bad. I can not smell any smoke or the burnt electrical smell anywhere on the board. Do mosfets become intermittent and only work sometimes? The reason I am asking is maybe the fet is good, but further back upstream some of the IC's might be faulty. So cha...

new plugs and leads new coil new idle air control. it s a holden rodeo 4cylinder petrol 2.2L C22ne.

Nah its a 4 cylinder and I have bought a new coil pack.