Search found 18 matches
- Sun Jul 08, 2018 2:53 pm
- Forum: Holden ALDL ECUs
- Topic: DFCO not working
- Replies: 15
- Views: 6746
Re: DFCO not working
At 1min DFCO works and at at 2min40 the TPS not being 0 prevents it. Could be a setting, a mechanical thing or your foot ever so slightly on the pedal. This is at 1min and shows DFCO working.... DFCO.png Weird. With the stock memcal my fuel usage goes to extremel lean and my instant fuel says 0. On...
- Sun Jul 08, 2018 1:49 pm
- Forum: Holden ALDL ECUs
- Topic: DFCO not working
- Replies: 15
- Views: 6746
Re: DFCO not working
When completely off throttle my wideband sits in the 14s with instant fuel using 2.6l an hor. On stock tune the revs go to 1k and says 0.0l per hourVL400 wrote:1min in to your log DFCO is working. At 2min40 TPS is not at 0% so wont be in DFCO.
- Sun Jul 08, 2018 1:21 pm
- Forum: Holden ALDL ECUs
- Topic: DFCO not working
- Replies: 15
- Views: 6746
Re: DFCO not working
I posted the log. Was just wondering if you can get decel enleanment on a VT aswell? Cruising without throttle at 80km uses about 2.6L per 100. LGBT throttle isnt bad using about 6-8l per 100. This is on the instant fuel usageBiggvl wrote:How about posting the log then?
- Sat Jul 07, 2018 2:08 pm
- Forum: Holden ALDL ECUs
- Topic: DFCO not working
- Replies: 15
- Views: 6746
Re: DFCO not working
Good idea.Biggvl wrote:How about posting the log then?
- Sat Jul 07, 2018 1:24 am
- Forum: Holden ALDL ECUs
- Topic: DFCO not working
- Replies: 15
- Views: 6746
Re: DFCO not working
Just looked at one of my logs and yes it shows VSS and TPvlad01 wrote:Have you checked that TP is showing vehicle speed when driving?
You need a VSS for DFCO to work.
- Thu Jul 05, 2018 3:46 pm
- Forum: Holden ALDL ECUs
- Topic: DFCO not working
- Replies: 15
- Views: 6746
Re: DFCO not working
I've tried uploading a new bin but it still doesnt work. Any ideas?The1 wrote:there shouldn't be any difference, what is the code on the silver sticker on the factory memcal?
- Sun Jul 01, 2018 11:41 pm
- Forum: General Tuning Discussion
- Topic: L67 Timing
- Replies: 1
- Views: 1742
L67 Timing
Is there any benefit to using the timing map from a VY l67 in a VT? Thanks
- Mon Jun 25, 2018 5:39 pm
- Forum: General Tuning Discussion
- Topic: Lean Cruise Settings
- Replies: 4
- Views: 3053
Re: Lean Cruise Settings
The 15 range will improve economy by 1-2% as 17-18 is a bit too lean and torque starts to fall away. I set my road speed somewhere around 30 or 40, temp was about 60 iirc, what ever the min temp where all the spark and fueling tables/scalars were at normal operating range. In some tunes I disable l...
- Mon Jun 25, 2018 2:44 pm
- Forum: General Tuning Discussion
- Topic: Lean Cruise Settings
- Replies: 4
- Views: 3053
Re: Lean Cruise Settings
yes for the temp, also there is a time out setting before it engages after steady state cruising, default I recall was around 1 min, I set it to about 5 sec. about 15.6-16 is ideal, v6 can operate around 17 with no issues but generally gain slightly from a mid to high 15 range. Can i lower the road...
- Mon Jun 25, 2018 1:32 pm
- Forum: General Tuning Discussion
- Topic: Lean Cruise Settings
- Replies: 4
- Views: 3053
Lean Cruise Settings
Just wondering if it's safe to set lean cruise to a road speed of 55 rather than the stock 70? In doing so is it also best to have the afr set to 15.4 rather than the stock 18? Will I gain fuel economy if I do this? Thanks