god damn. you really have to want to do this. note ; if you are going to use in a later model (like vx) get the ECU plugs from a vt berlina or calais ... as they have things like the PRND321 indicators :) So I’ve just made my conversation loom wondering why I’m missing the PRND321 wires on my harne...

So I replaced the spark plug leads yesterday with eagle elimintor performer series 8.0mm leads ($99 trade supercheap auto online). I think the knocking is better, but is still there. Having a bit of a play today whilst logging, the knock is most prominent under light acceleration between 1500-2500 r...

I bought replacment injectors from The1 one this forum as a flow matched set. Unfortunately replacing the filter baskets and O rings and spraying injector cleaner into the top doesn't clean out the actual working parts inside the injector which is the most important part. I'll shoot him a pm. When ...

No, the O2 sensor only reads the bank as a whole so if lets say one injector is sick (partially clogged) during closed loop mode it will increase the PW on all 3 injectors to bring the whole bank back to where it wants. On our Calais I had slight difference between the LH and RH fuel trims, fitting...

You can play around with some transmission settings that makes em feel a bit more responsive. Been doing some more logging now I've got 95 octane in the car. 1-2 gearshift time is 1.4-1.6 seconds, 2-3 is pretty good it's at 0.45 seconds. I've read the1's quick pdf guide on how to tune the auto but ...

Thanks for your reply Wade. Just remembered, when doing that log run dtc code 76 c/l integrator failure was set, when I seen it I cleared it and it hasn't since returned, but what is it? I can't find anything definitive on the web and I'm still fishing around the house for the workshop manual. Cheer...

Hi Everyone, New to the world of tuning, done plenty of reading on the subject now. As stated in the topic, Car is a N/A VY Commodore V6, I have grabbed a spare PCM and uploaded the1's Enhanced Bins to the car. So upon my first log I noticed there was a reasonable amount of knocking going on, the ca...

Use sudt accessport to log serisl comms and not ose flash tool. Sudt works in the background so doesnt fight opening the port Now that the long weekend is here and I have time to keep playing with this again given that every single store is shut.... I might be doing something wrong within that prog...

Anyone ever found the arrow software? been here since 2015 when i first uploaded it. http://www.vyssute.com/downloads/VY-Dash/ Word of warning, u can corrupt the dash config if you send it silly things or apply it to vz clusters. hey mate what username and password do you use to access the arrow pr...

Topic solved:

In case anyone comes looking, it was the cable.