update - it is fixed!! Pretty confident it was all a user error :oops: Having said that I have learned a lot in the last couple of days & really tested my patience.. If you have read through the above you will have noted my errors along the way & will note the advice given. I am grateful to ...

Thank you all for your responses, help & guidance. I think you have nailed it as I am certain I used the download to emulator button to get the tune into tunerpro. Which I know I should not have, but I completely forgot that. I have just walked in the door from work & cannot tell you all how...

Thanks guys. Greatly appreciate your input.
Will check later tonight after work.
In regards to saving the BIN, all I did was open Tuner Pro & then saved the bin to a folder.
Is this correct, or did I make an error here?

Hi All, I'm hoping for some help. I am having trouble burning my tune to a Winbond W27C5 EEPROM. I have also tried an original VR V8 Memcal after erasing it & got the same result. I have saved the BIN via Tuner Pro. The Bin shows as a 32KB file. I have followed the Guide to Burning EEPROMS. Bin ...

Thanks for the replies Immortality & Gampy. The rest of the towing set up is in an 80 Series Landcruiser. Std Toyota gearbox etc There is minimal clearance between the sump & the exhaust. With a single layer of exhaust wrap fitted there is about 3 mm. Mind you that one piece of wrap has made...

Hi Brindo, thanks for your reply. Oil temp gets to 125 degrees c when towing 2 tonne at 100km/h to 110km/h for more than 1.5 hours. Put the air cond on & she heads into the 130's.. Coolant temp sits at 95 to 103 degrees c under these conditions. Biggest contributing factor is how close the exhau...

Thanks Charles, I appreciate your input mate..

Hoping someone may be able to share some info on exhaust gas temps. What I am looking for is an idea on what temps to expect on a NA Holden 5L. Also if anyone can suggest what a safe max temp might be. My 5L in my Landcruiser tends to sit at 666 degrees c under load at 2800 to 3200 rpm & at arou...

Very impressive mate

Looking to put an engine oil cooler onto my 5L.
I am hoping some of you may be able to share your experiences with engine oil coolers, Pro's & Cons.
Thank you all in advance