Search found 19 matches
- Thu Jul 01, 2021 9:24 pm
- Forum: Chip/Memcal Reading/Writing
- Topic: Burning memcal help please
- Replies: 10
- Views: 6265
Re: Burning memcal help please
update - it is fixed!! Pretty confident it was all a user error :oops: Having said that I have learned a lot in the last couple of days & really tested my patience.. If you have read through the above you will have noted my errors along the way & will note the advice given. I am grateful to ...
- Wed Jun 30, 2021 6:57 pm
- Forum: Chip/Memcal Reading/Writing
- Topic: Burning memcal help please
- Replies: 10
- Views: 6265
Re: Burning memcal help please
Thank you all for your responses, help & guidance. I think you have nailed it as I am certain I used the download to emulator button to get the tune into tunerpro. Which I know I should not have, but I completely forgot that. I have just walked in the door from work & cannot tell you all how...
- Wed Jun 30, 2021 5:58 am
- Forum: Chip/Memcal Reading/Writing
- Topic: Burning memcal help please
- Replies: 10
- Views: 6265
Re: Burning memcal help please
Thanks guys. Greatly appreciate your input.
Will check later tonight after work.
In regards to saving the BIN, all I did was open Tuner Pro & then saved the bin to a folder.
Is this correct, or did I make an error here?
Will check later tonight after work.
In regards to saving the BIN, all I did was open Tuner Pro & then saved the bin to a folder.
Is this correct, or did I make an error here?
- Tue Jun 29, 2021 4:28 pm
- Forum: Chip/Memcal Reading/Writing
- Topic: Burning memcal help please
- Replies: 10
- Views: 6265
Burning memcal help please
Hi All, I'm hoping for some help. I am having trouble burning my tune to a Winbond W27C5 EEPROM. I have also tried an original VR V8 Memcal after erasing it & got the same result. I have saved the BIN via Tuner Pro. The Bin shows as a 32KB file. I have followed the Guide to Burning EEPROMS. Bin ...
- Thu May 16, 2019 9:17 pm
- Forum: Engine/Transmision Mechanical
- Topic: Engine oil cooler on 5 litre
- Replies: 5
- Views: 4712
Re: Engine oil cooler on 5 litre
Thanks for the replies Immortality & Gampy. The rest of the towing set up is in an 80 Series Landcruiser. Std Toyota gearbox etc There is minimal clearance between the sump & the exhaust. With a single layer of exhaust wrap fitted there is about 3 mm. Mind you that one piece of wrap has made...
- Mon May 13, 2019 8:30 pm
- Forum: Engine/Transmision Mechanical
- Topic: Engine oil cooler on 5 litre
- Replies: 5
- Views: 4712
Re: Engine oil cooler on 5 litre
Hi Brindo, thanks for your reply. Oil temp gets to 125 degrees c when towing 2 tonne at 100km/h to 110km/h for more than 1.5 hours. Put the air cond on & she heads into the 130's.. Coolant temp sits at 95 to 103 degrees c under these conditions. Biggest contributing factor is how close the exhau...
- Sat Apr 27, 2019 5:52 pm
- Forum: Engine/Transmision Mechanical
- Topic: Exhaust Gas Temps
- Replies: 2
- Views: 3442
Re: Exhaust Gas Temps
Thanks Charles, I appreciate your input mate..
- Sat Apr 27, 2019 1:00 pm
- Forum: Engine/Transmision Mechanical
- Topic: Exhaust Gas Temps
- Replies: 2
- Views: 3442
Exhaust Gas Temps
Hoping someone may be able to share some info on exhaust gas temps. What I am looking for is an idea on what temps to expect on a NA Holden 5L. Also if anyone can suggest what a safe max temp might be. My 5L in my Landcruiser tends to sit at 666 degrees c under load at 2800 to 3200 rpm & at arou...
- Thu Apr 25, 2019 6:00 pm
- Forum: Members Rides
- Topic: Vlad's rides thread
- Replies: 3386
- Views: 1340011
Re: Vlad's rides thread
Very impressive mate
- Thu Apr 25, 2019 11:00 am
- Forum: Engine/Transmision Mechanical
- Topic: Engine oil cooler on 5 litre
- Replies: 5
- Views: 4712
Engine oil cooler on 5 litre
Looking to put an engine oil cooler onto my 5L.
I am hoping some of you may be able to share your experiences with engine oil coolers, Pro's & Cons.
Thank you all in advance
I am hoping some of you may be able to share your experiences with engine oil coolers, Pro's & Cons.
Thank you all in advance