After some more playing with formulas and calculating what x = I've tested the following formula for 2 bar (x + 14 ) / 1.33168 I'm not sure how the + 28 was determined for 1 bar setup but guess there must be some science behind it, I therefor halved it for 2 bar setup. When I know compare GM enhance...

Forgot to add in above post that at atmosphere SAE gauge is displaying 95 KPA vs GM MAP KPA 106

I did try that equation ((X + 28) / 2.71) * 2 but found that it reads correct at full range 202 kpa with a voltage from map sensor to ref of 4.996v, sensor open to atmosphere i'm getting 106 kpa at 2.27 v (a little higher than expected as my elevation is around 240M) and if if disconnect MAP sensor ...

Does anybody know the equation for 2 bar MAP for ls1 adx 1.6 I've tried using the equations posted on thread https://pcmhacking.net/forums/viewtopic.php?t=3509 The equations in the above thread are the same as used on 12P files, these don't work for the LS1 adx From my test's it appears that the MAP...

Can anyone provide information on how the LS1 ADX file equates the MAP value. In a nut shell I'm trying to log my 2 bar holden setup and if i edit the range on the gauge to 200 when appying pressure to the map sensor it stops at 105 kpa same as what was originally setup in the ADX with gauge max of ...

Jayme,
What type of wideband sensor is the equation for ?(e.g bosch lsu 4.2 or bosch lsu 4.9)

Has anyone developed an OS (other that expensive efi live / HP tuner) for the 411 (ls1) pcm similar to $12p that supports boost.
Seems the 411 is widely used but all my reasearching has found nothing developed supporting boost other than hacks that we can use tuner pro with