Hey guys got the vx l67 memcal from eBay and it works fine. Engine runs good and the cluster functions normally. Cheers for all you help.

Cheers guys. I have ordered a vx memcal which I hope will sort it out. I will keep you posted if it works or not

The bcm is the original vu one. When I swap the memcal to a n/a vt/vx one the dash works fine but it runs shit due to only being a n/a tune so thinking I can either get a standard vt/vx memca l tuned to l67 or get a vt/vx l67 chip. Any one had any thing to do with the ones of eBay?

The way I think is I've set the engine as a vx/vt l67 by using that model harness with the 3 plugs on the drivers side. Using a 396 pcm but it has a Wk mental in it. So if I put a vt or vx memcal in it will that sort it out?

Any idea what one will suit a vu dash and bcm?

Is there a difference between the vt/vx and vy memcal?

Hi the engine came out of a Wk statesman which is the sam e as vy i believe so still using that memcal. I have tried swapping it into a 396 pcm out of a vt/vx but no joy.

Hi I've used the pcm from the statesman the engine and trans came out of and used a wiring harness from a vt/vx super charged vehicle so it has the 3 plugs at the right top of engine bay. Using original bcm and coded the key with a g scan to get it running. Cheers Edit. Original pcm was 445 service ...

Hi guys I've put an l67 into my VU ute and matched the pcm and bcm and it fires up perfectly but after about 5 seconds the transmission power light comes on on the cluster and the fuel gauge jumps up and down randomly then after about a minute the oil pressure light comes on and occasionly the engin...