ok yeah from memory thats what it running yoda set it up a few month ago when i corrupted the tune ..sadly the water pump is leaking badly so no testing today .. was running very ruff tho or its got one bitch of a cam in it lol

ok she almost back together running sum what rough .. ill capture some data and ask the experts here what it all means and how to improve the tune

Thanks David

hmm ok vlad the old vn ones work .. there are heaps of new ones on ebay but not sure of quality ?

thanks Antus no doubt ill be back in a few days ..was running the std 12p tune yoda help me sort out a while ago

ok thanks guys it running with vn injectors will spring the $220 for a change over set and $90 for o2 then finishes putting it together
http://www.youtube.com/watch?v=OF3R8pYmfaU
thanks again

David

delcowizzid wrote:inline fuel reg????

delco a after market on with pressure guage on it just added it the return in to tank to see if that was problem seem to be injector thou only 4 of the 6 working

ok just pulled injector rail off only 2 are working .. will swap them out for the series 1 injectors not sure if there the same but will give it a go whilst i get the old one rebuilt

its a stocker from a wreckers ,, so who knows .. it fires using start bastared i dont have o2 sensor connected as i need a 2 wire one but should still start added a in line fuel reg i had laying arround have 60 psi fuel pressure .. have a log here doesnt mean a lot to me but will load for you to loo...

lol vl that not what i wanted to hear .. i have checked ecu nvram and it lights up as u said with ign on ... have spark and checked injector pulse im not sure about fuel pressure as i have no way to check it maybe dumping start ya bastard in to throttle body will help .. it plug laptop in tomorrow a...

thanks guys i ran a power wire to A6 the pink and the fuel pump fired up .. but sadly it didnt run ill check out the mentioned pin power supplys and see if that helps once again thanks Guys ok check wires as vl recommended all good .. gave her another crank and she splutters but wont run check leads...

thanks Holden202T i have pre 0ct drawings but trying to work out whats post is a little differrent as most are not labelled i have power to efi relay have spark engine cranks but there no power to cel d16 to ecm is live but the tell tail led on the usb comms board doesnt light up which tells me that...