This logger has been working great for me. Using https://datazap.me/ allows you to put these log files into graph/timeline form. Now I was wondering if anyone has compiled a list of PIDs for the P01/P59 along with their descriptions? Would like to log your VE table/TAFR while you drive and it log RP...

160plus wrote:The only real "Universal" OS for the P01's is the 12212156.......

Will it support 3 bar map?

Wanted to update you guys on the two 4896 ECUs I have been wanting to convert to 0411 OS. I ordered a OBDlink LX after talking to pete and he allowed me to use his LS droid software to flash the 0411 OS to my 4896 ECU. The flash was a success and now PCM Hammer will read and write to the ECU with no...

I just got an LX myself. :) I haven't tried it yet but I'm a little surprised that it didn't just work like an SX. Speeds should be in between the SX and the AllPro (closer to the AllPro) when the app supports it. Perhaps we should release a version with LX support and the checksum fix, ahead of th...

I'm guessing that PCM Hammer's checksum validation code isn't right for that OS. The good news is that checksum validation has already been rewritten for the next release, so this problem should go away. The bad news is that the next release is held up by a problem with P59 flashing. I just picked ...

How well would PCM hammer work with the OBDlink LX (Bluetooth version)?

Yep can confirm the checksums in the files are good, looks like we'll need to sus out how they are calculated and add support to pcmhammer. The XDFs have the author listed as "John Hodel", Thanks John! They also have the checksum calculations included so that is the information we would o...

I can't remember the forum/post, where I downloaded this XDF zip file from (Gearhead-efi?), a week ago. It is unique from other P01/P59 XDFs, in that when you "Select XDF" on TunerPro, you open an XDF folder which contains 6 XDFs (fuel, idle, spark, etc.). You then choose/switch an XDF fr...

Thanks to all who are developing PCM Hammer. I tested version 4, using a bench harness and AllPro USB interface connected to a P01 pcm serv#9354896, with o/s 9381344. On the bench harness, PCM Hammer successfully performed the following..... It did the same on my 4896 ECUs as well. Read fine and cr...

DavidBraley wrote:

JonnyB wrote:
If others have had good luck with Sloppy's bench harness, please speak up. I have no experience with it.

I am currently using one I built from the sloppy wiki. I just followed the pictures