I finally got my Tech2 hooked up on the bench. I can now extract all of the PCM software details along with basic .BIN with Pcmhammer. Dumping BINS, and extracting data with the Tech2 on all of the LS PCM's I can pull from the dismantling lot. What else can I do to help out, and where can I dump the...

I pulled two more PCM's today.
Anyone have XDF's for either?

One is a 4.8 and the other is a 5.3

Efilive v7.5.x in trial mode will open bin files and tell you about the contents, but it will not save back to bin format. Its a good tool for testing and learning about reads and while those reading this thread probably are not looking for a tool from one of the big players - if you did want somet...

What are you using to extract the os# from the bin? I don't have a XDF to look at my bin right now. Are you using something other than TunerPRO? I'd like to start poking around.. Service Number 12602801 Hardware Number 12589161 Thank you. (it appears you added them to the other post while I was typ...

Yes the numbers are off the stickers. It's too rainy, but I'm pretty sure the tech2 will get the service numbers. I initially bought it to work on a 2012 Equinox (had a bizarre BCM problem that was messing up the STABILI-TRAC system, the steering angle sensor and and A/C controls) I'm just starting ...

What are you using to extract the os# from the bin?
I don't have a XDF to look at my bin right now. Are you using something other than TunerPRO?

I'd like to start poking around..
Service Number 12602801
Hardware Number 12589161

Service Number 12602801 Hardware Number 12589161 GM WEB-VIN decode says this: 12613246 - Operating system PCM 15107481 - Operating system BCM Anyone have an XDF to work this in TunerPro? Good news! I got a good bin out of my PCM tonight. It took a while to get downloaded with a OBDLINK-SX cable. Loo...

Good news!

I got a good bin out of my PCM tonight.
It took a while to get downloaded with a OBDLINK-SX cable. Looking forward to getting a 4x interface.

Stumbled on a site that has some dev boards that might work, they even have Serial and CAN modules. https://copperhilltech.com/arm-cortex-m3-stm32-mini-development-board/ https://cdn10.bigcommerce.com/s-7f2gq5h/products/97/images/303/STM32F103C8T6_Development_Board__81888.1458827457.500.750.jpg?c=2 ...

For what it's worth, he said that he sold all of them, and the minimum order for more was 500 units, and he wasn't going to spring the cash to sit on what he said was only a handful a month selling. Too bad really, would have liked to have one of these units instead of the SX or HX adapters. Hopeful...