Hi all, I’m looking at getting my setup tuned on dyno. It’s a 304 series 3 with a vp ecu/loom fitted to a Toyota Bundera I’ve been told there’s no pint in getting Dyno tune if it’s stock just go a good retuned memcal? I thought as it’s in a completely different t setup it would make sense? Thoughts?...

Thanks heeps Joe! So if I find the a10 pin on back of ecu plug and do an ohms test with multie metre I should be able to find the wire. As for the A11 do I need to connect that to the earth wire on the vss sender off the gearbox? Trying to wrap my brain around it all A’s this is the first major conv...

Hi guys, How do I wire up the speed sensor? It’s going in a Toyota Bundera - Ive got the in-line cable vss mechanism it’s a 2 pulse hal affect setup. Where do I wire it into as in where do I find the wire on the loom? It’s a vp loom an ecu... I’m ok with getting the ignition supply and earth but jus...

Hi guys, How do I wire up the speed sensor? It’s going in a Toyota Bundera - Ive got the in-line cable vss mechanism it’s a 2 pulse hal affect setup. Where do I wire it into as in where do I find the wire on the loom? It’s a vp loom an ecu... I’m ok with getting the ignition supply and earth but jus...

Hey guys,
Thanks for the info and also what colour wire is the speed sensor and is nxt to diagnostic plug or the one further along the loom where the thermo fan switch wires n that come out?
Cheers

https://www.aussiev8.com.au/conversions ... o-rqd.html

This is what I’m talking about.. do I need to convert the signal to suit the vp ecu?

Ledgends, I need help setting up a speed sensor on my Bundera - it’s got a 304 with a vp ecu n loom I need to fit a speed sensor onto cable drive off Toyota gearbox. I was told I needed to find out how many pulses I needed for the VP ecu? Can anyone confirm this for me please? Am I on the right trac...

Cheers

Also would u guys happen to know the name of the plug and the other pin outs what they do? Keen to know...