Search found 58 matches
- Thu Sep 26, 2019 4:56 pm
- Forum: General Tuning Discussion
- Topic: Dyno tune versus a memcal tune
- Replies: 32
- Views: 16536
Dyno tune versus a memcal tune
Hi all, I’m looking at getting my setup tuned on dyno. It’s a 304 series 3 with a vp ecu/loom fitted to a Toyota Bundera I’ve been told there’s no pint in getting Dyno tune if it’s stock just go a good retuned memcal? I thought as it’s in a completely different t setup it would make sense? Thoughts?...
- Fri Sep 20, 2019 6:11 am
- Forum: Wiring
- Topic: Wiring up vss speed sensor help
- Replies: 3
- Views: 2249
Re: Wiring up vss speed sensor help
Thanks heeps Joe! So if I find the a10 pin on back of ecu plug and do an ohms test with multie metre I should be able to find the wire. As for the A11 do I need to connect that to the earth wire on the vss sender off the gearbox? Trying to wrap my brain around it all A’s this is the first major conv...
- Thu Sep 19, 2019 6:26 pm
- Forum: Wiring
- Topic: Wiring up vss speed sensor help
- Replies: 3
- Views: 2249
Wiring up vss speed sensor help
Hi guys, How do I wire up the speed sensor? It’s going in a Toyota Bundera - Ive got the in-line cable vss mechanism it’s a 2 pulse hal affect setup. Where do I wire it into as in where do I find the wire on the loom? It’s a vp loom an ecu... I’m ok with getting the ignition supply and earth but jus...
- Thu Sep 19, 2019 6:16 pm
- Forum: Delco ECU Conversions
- Topic: Vss speed sensor wiring
- Replies: 0
- Views: 5731
Vss speed sensor wiring
Hi guys, How do I wire up the speed sensor? It’s going in a Toyota Bundera - Ive got the in-line cable vss mechanism it’s a 2 pulse hal affect setup. Where do I wire it into as in where do I find the wire on the loom? It’s a vp loom an ecu... I’m ok with getting the ignition supply and earth but jus...
- Thu Sep 19, 2019 1:45 pm
- Forum: Delco ECU Conversions
- Topic: Help with speed sensor conversion
- Replies: 6
- Views: 5588
Re: Help with speed sensor conversion
Hey guys,
Thanks for the info and also what colour wire is the speed sensor and is nxt to diagnostic plug or the one further along the loom where the thermo fan switch wires n that come out?
Cheers
Thanks for the info and also what colour wire is the speed sensor and is nxt to diagnostic plug or the one further along the loom where the thermo fan switch wires n that come out?
Cheers
- Thu Sep 19, 2019 8:23 am
- Forum: Delco ECU Conversions
- Topic: Help with speed sensor conversion
- Replies: 6
- Views: 5588
- Thu Sep 19, 2019 8:10 am
- Forum: Delco ECU Conversions
- Topic: Help with speed sensor conversion
- Replies: 6
- Views: 5588
Re: Help with speed sensor conversion
https://www.aussiev8.com.au/conversions ... o-rqd.html
This is what I’m talking about.. do I need to convert the signal to suit the vp ecu?
This is what I’m talking about.. do I need to convert the signal to suit the vp ecu?
- Thu Sep 19, 2019 6:49 am
- Forum: Delco ECU Conversions
- Topic: Help with speed sensor conversion
- Replies: 6
- Views: 5588
Help with speed sensor conversion
Ledgends, I need help setting up a speed sensor on my Bundera - it’s got a 304 with a vp ecu n loom I need to fit a speed sensor onto cable drive off Toyota gearbox. I was told I needed to find out how many pulses I needed for the VP ecu? Can anyone confirm this for me please? Am I on the right trac...
- Sun Sep 15, 2019 3:58 pm
- Forum: Holden ALDL ECUs
- Topic: Help with pin out on a VP plug
- Replies: 7
- Views: 2568
- Sat Sep 14, 2019 11:14 pm
- Forum: Holden ALDL ECUs
- Topic: Help with pin out on a VP plug
- Replies: 7
- Views: 2568
Re: Help with pin out on a VP plug
Also would u guys happen to know the name of the plug and the other pin outs what they do? Keen to know...