bit of an update here shes all back together and running well no more issues cold starting etc HOWEVER i think my wiring to the DFI is failing the car stalls out randomly driving or idling etc.. a quick wiggle of the dfi wiring (up by the plug) and turn key to restart again has anyone else come acro...

IMO it is/was a mistake not having them properly crack checked! But that's just my opinion ... Thats a fair opinion mate I would love to find a set of uncracked heads. But the chances of that in NZ are slim and costly. As I live out of town, walk to work, and have a daily driver for my partner, I'm...

bit of an update Gave the heads, LIM, and charger case a good degrease in prep to service and some mild porting. I stripped out the passenger head where the suspect cylinder 3 was and oh my god, all 3 exhaust valves on that head were not sealing on seat correctly. Cylinder 3 exhaust valve stem had 2...

Hey Team!, This story is over the last couple of months, it gonna be long but i wanted to put every detail i can here.. Car Specs: 2003 VY Spac Getrag Manual L67 V6 (Supercharged V6) (150xxxks) Motor related mods: Alloy LIM Gaskets VY L67 Loom and computer (reprogrammed to suit manual) Xforce stainl...

[youtube]https://www.youtube.com/watch?v=Q8wT8mzne5A[/youtube] After running this tune for a few weeks now I have a write up for anyone thinking of doing the same. Very hard on autos, coming to a stop as its going into idle the car will bunny hop and shudder. Fuel consumption was well over 20L/100k...

The1 wrote:first one is to enable or disable the idle timeout timer for closed to openloop idle.
second one just means that RPM is disabled in the cell table. Likely you wont be idling at that rpm anyway.

so to confirm ... checking the box will make the ecu switch to open loop at idle?

Hey guys, looking to get some clarification on a couple items in the VY $06A V6 bin 1x Flag - Do Not Select Open Loop Idle Logic SET= Enabled - checking this box, does this disable open loop idle or enable it? 2x Scalers - IDLE - RPM Low/High Hyst > This IDLE Cell Disabled - Does this mean that an i...

delcowizzid wrote:You can edit 2 hex addresses to make it full manual so it doesn't shift up and down there's a post on here by yoda69 on the addresses to modify

ohhh fancy i might do some digging hahah

Removed in respect of tune owner

Removed in respect of the creator