hi all I'm fairly new to this stuff I've read all the posts on how to connect I've tried my self running through the programs outlining how to connect followed exactly but still no connection. eg port connection, com 3 which is mine it dose emulate, no connection put 12p on computer(pc) used bin fi...

ive worked it out its the drivers on the windows 10 conflicting.

i thing im using the vz version im going to try a different one. ill let you guys know.

Charlescrown wrote:What XDL are you using? If that's not the correct one for 12P it won't log.

ose_12p v112 off this site included is adx,xdl and bin together under vn v8

hi all I'm fairly new to this stuff I've read all the posts on how to connect I've tried my self running through the programs outlining how to connect followed exactly but still no connection. eg port connection, com 3 which is mine it dose emulate, no connection put 12p on computer(pc) used bin fil...

Thankyou for your help I've got it powered up now so back to reading more on tuning up the ecu.
All your help has been a godsend!

yes i have all the v8 wiring diagrams A6 is connected to power the difference between vr manual wiring loom and vn auto loom is there is less wires coming out of the ecu eg b10 has no wire fitted on the loom but my understanding is the inhibitor wire needs to be connected for auto neutral / park to ...

hi all, not sure how but im thinking i have a bit of problem ive got a vr 304 manual wiring harness, attached to an vq 808 auto ecu. from all the wiring diagrams ive looked at ive now noticed i have no wire coming out of b10 on the ecu apparently this wire gets hooked up to a neg on neutral safety s...

Hi I'm wanting to get a lot of help here before I melt something, I've got a VK 6cyl carb which is removed putting in a 304. And th700r4. I have a vr 5ltr loom by 5ltr block I've looked through all wiring section's can not find much. I want to know how to hookup the computer (pcm) to the 6cyl VK com...

Diggertyree1965 wrote:Hi all I need help identifying a bcm problem or a wiring problem when I apply brakes dash lights come on and drivers side low beam head light comes on any ideas as it doing my head in

usually a negative somewhere.. just look and follow negative battery and further.. may help!