Changed distributor even boutht a new one Ebay module lasted 30 min trip and failed , pickup coil tests in spec changed module runes again but same still have done voltage test on earth wires ,ok even voltage drop test on earth am looking at positive voltage test here all seams ok have been reading ...

Three different ecus with there own memcal , memcals not swaped between ecus

was thinking of keep or bin so for now will keep , have a n13 1.6 ecu will try and swap a memcal into it was working when removed do mencals fail ? as the car has a unstable ignition timing , at idle it jumps around 10 deg +/- and has a retard spike of 20 deg enough to have it back fire in the intak...

Hop this is the right place for this post I have 3 N13 ecus all no start 1 was dirving and it stopped no restart again , another ecu runs again 2 an ebay buy plugged in no start ? sold a dud 3 I have no idea where it came from what can i look at it see if they can be got working again ? is there a c...

thanks have plugs for the dfi arriving this week got two sets

Want to do a bench test before install in car N13 do I need a reference signal for bench test ?

I just need a way to fit this in with ac . alt and power steering on a n13

toyota used a 15deg space roter in the early 90s would this be an option

where can if find one of them or can I make it from another distributor , toyota mazda ? some of them have something like that , have lathe will fit

RE VR = crank angle sensor , do not have a lot of space in this area in a N13 as have Power steering , AC and altinator , am hoping can use a n13 distrubitor , was looking at ford hall sensor from a falcon 6 , how many pulses dose the d1927a need to work ? or dose it work with a gap in pulses ? I un...