because I still havent solved it and I came across something, can anyone answer this

I read my car in HpTuners and it says
Hardware: P01 ECM, GM Gen3 V8, 4.3L V6

what the hell is 4.3L V6? is this because ive changed the pulses, or the custom os? surely not, is it the pim?

im trying to wire up a VE commodore cluster on the bench, I have the ground, power, ignition. which illuminates the center lcd, how do I get the rest of the lights on. there doesnt appear to be a wire, or is something else needed? ive literally tried every other wire on power, and on negative. most ...

Found the solution It turns out I had it wired correctly, needs the iso, can and green? wire all on the serial The problem was the way I was checking the communication, I was using a snapon diagnostic tool. Which must need modules connected, which was silly as this can't even program the clusters I ...

The cluster plug and obd2 port would be from a 2006 Holden Commodore VE. I wired up Vt-vz as there was plenty of info. But nothing for VE

Is it possible to wire up a bench set up for VE clusters with just the obd2 connector and cluster plug. I've got battery and ground on the cluster plug, and an ignition switch to turn on the cluster The problem lies with the obd2, I can't get communication? Is there something else needed? For obd 4,...

Thought so too, but I tried a mates cluster in mine and it still read low

I did some testing on the tune (tacho pulses) and found: (In park) 6 pulse (default) low cluster reading 5(not tested) 4 pulse Close, reads 100 or so too low 3 pulse Cluster reads too high ------- 4 pulse seems to be somewhat accurate, off by 100 or so what the actual issue is i'm not too sure but I...

Thanks, I had a look at the tune im using. I'm using a "default" vats removed, hsv one, as I already assumed the ecu tune was the issue I have a tacho low pulse of 6. and a high pulse of 6 also. The references on the tunerpro files I have, state : v8 should be at 3 for both v6 should be at...

I have a 2002 VY SS ute (auto). and my cluster has a wrong tacho reading. It appears to show less rpms than what it actually is. It was always like this I have tried- "resetting" the cluster, via eeprom, then matching it to my cars specifications plugging in a friends cluster. it also read...