Vs v8 scanning help
- Nitro Worms
- Posts: 68
- Joined: Fri Apr 01, 2016 2:45 pm
Re: Vs v8 scanning help
Hahaha. I know, you've just been trying to dodge the taxman or something lol.
Some of your old posts were 'quite entertaining'.
Looking forward to more of the same.
Some of your old posts were 'quite entertaining'.
Looking forward to more of the same.
- Nitro Worms
- Posts: 68
- Joined: Fri Apr 01, 2016 2:45 pm
Re: Vs v8 scanning help
Pm incoming Gareth, lets do it.
Re: Vs v8 scanning help
Would like to see some snaps if possible. Sounds interesting.
- Nitro Worms
- Posts: 68
- Joined: Fri Apr 01, 2016 2:45 pm
Re: Vs v8 scanning help
Ive ordered the nvram and aldl cable.
Rang chip torque with the number on memcal and he looked it up, was about 10 years ago he said and he had notes of tune and mods done. He said it was a 248 248@50 solid with 550 lift cam on 108
Ive got my buddy to buy a coil, plugs, oxy sensor and new map sensor and when all the gear turns up we can start playing with it.
Rang chip torque with the number on memcal and he looked it up, was about 10 years ago he said and he had notes of tune and mods done. He said it was a 248 248@50 solid with 550 lift cam on 108
Ive got my buddy to buy a coil, plugs, oxy sensor and new map sensor and when all the gear turns up we can start playing with it.
Last edited by Nitro Worms on Mon May 10, 2021 12:23 pm, edited 1 time in total.
- Nitro Worms
- Posts: 68
- Joined: Fri Apr 01, 2016 2:45 pm
Re: Vs v8 scanning help
Have you had that username forever here or over at Aussie V8? Maybe my memory has
gone on me.
gone on me.
- delcowizzid
- Posts: 5493
- Joined: Sat Feb 28, 2009 8:38 pm
- Location: Wellington NZ
- Contact:
Re: Vs v8 scanning help
Put his tuned memcal in your modded 808 and use the vs v8 adx you should be able to log it you may just have to flip the rs232 echo check box in the adx to get proper data you will also be able to suck the tune out with the ose flashtool
If Its Got Gas Or Ass Count Me In.if it cant be fixed with a hammer you have an electrical problem
- Nitro Worms
- Posts: 68
- Joined: Fri Apr 01, 2016 2:45 pm
Re: Vs v8 scanning help
G’day Delcowizzid,
Long time no see. I will try that, sounds like a great idea!!
Thanks very much, I didn’t think of that.
Long time no see. I will try that, sounds like a great idea!!
Thanks very much, I didn’t think of that.
- delcowizzid
- Posts: 5493
- Joined: Sat Feb 28, 2009 8:38 pm
- Location: Wellington NZ
- Contact:
Re: Vs v8 scanning help
Only problem you might have is no start if his tune still has vats
If Its Got Gas Or Ass Count Me In.if it cant be fixed with a hammer you have an electrical problem
- Nitro Worms
- Posts: 68
- Joined: Fri Apr 01, 2016 2:45 pm
Re: Vs v8 scanning help
I called in and picked up his memcal and just removed my nvram along with the memcal that is connected to the nvram (forgot that was even in there) and clipped his chip torque in to the 808 will see if I can suck it out. He has some type of immobiliser in his car, he had to rub a his dingly thing against something within 10 seconds to start the car