Clone Tech 2

160 And 8192 Baud Aldl
Post Reply
megajuz3003
Posts: 74
Joined: Sun Aug 26, 2012 9:47 pm
cars: 2001 VU SS
Location: Brisbane

Clone Tech 2

Post by megajuz3003 »

I have been seeing all of these Clone Tech 2 units on ebay and was wondering if they are actually worth the money or is it a waste of money ?

https://www.ebay.com.au/itm/Tech2-Car-F ... Sw63FaN2WG
User avatar
antus
Site Admin
Posts: 8237
Joined: Sat Feb 28, 2009 8:34 pm
cars: TX Gemini 2L Twincam
TX Gemini SR20 18psi
Datsun 1200 Ute
Subaru Blitzen '06 EZ30 4th gen, 3.0R Spec B
Contact:

Re: Clone Tech 2

Post by antus »

Seems like a lot of money compared to aliexpress... and its not the newer MDI interface, but maybe thats preferred for some people (not me). They work, but for how long? Cant say.
Have you read the FAQ? For lots of information and links to significant threads see here: http://pcmhacking.net/forums/viewtopic.php?f=7&t=1396
User avatar
Tazzi
Posts: 3422
Joined: Thu May 17, 2012 8:53 pm
cars: VE SS Ute
Location: WA
Contact:

Re: Clone Tech 2

Post by Tazzi »

How long you ask?

... I have 3 sitting on my shelf.... dead :lol:

MDI has been great, other than the usbs eventually breaking off from lots of use (Can be fixed). This is revised in the newer MD2's where they use better connections again.
Your Local Aussie Reverse Engineer
Contact for Software/Hardware development and Reverse Engineering
Site:https://www.envyouscustoms.com
Mob:+61406 140 726
Image
Post Reply