BCM Simulator
-
- Posts: 81
- Joined: Thu Jun 11, 2009 12:25 am
- cars: Commodore's .....what else?? :-)
- Location: Goulburn, NSW
Re: BCM Simulator
Very Nice!!!!
Re: BCM Simulator
awesome!
- Holden202T
- Posts: 10311
- Joined: Sat Feb 28, 2009 9:05 pm
- Location: Tenambit, NSW
- Contact:
Re: BCM Simulator
happy days!
No matter what the question is, the answer is always more horsepower!
Just starting out? Have a read of the getting started guide
Basic tuning of a delco ECM with $12P thread
Advanced tuning of a delco ECM with $12P thread
Just starting out? Have a read of the getting started guide
Basic tuning of a delco ECM with $12P thread
Advanced tuning of a delco ECM with $12P thread
Re: BCM Simulator
is there a way you could get one of these connected to a 808 ecu to control a vy dash
- VL400
- Posts: 4991
- Joined: Sun Mar 01, 2009 2:54 pm
- cars: VL Calais and Toyota Landcruiser. Plus some toys :)
- Location: Perth, WA
- Contact:
Re: BCM Simulator
With lots of code changes to the 808 it might be possible to get working, never really looked at it though as the market would be very small and 12P has no RAM left so it cant happen on that.
-
- Posts: 72
- Joined: Wed Jul 11, 2012 7:53 pm
- cars: ke70 corolla v6 ecotec powered. t5 manual
- Location: Gold Coast qld
Re: BCM Simulator
Hi, how much are you doing these for assembled? Also could I use it to simulate bcm on a stock ecotec, conversion? ,
Thanx.
Thanx.
- VL400
- Posts: 4991
- Joined: Sun Mar 01, 2009 2:54 pm
- cars: VL Calais and Toyota Landcruiser. Plus some toys :)
- Location: Perth, WA
- Contact:
Re: BCM Simulator
Will send you a PM with more details, but yes it will allow you to run a ecotec in a conversion without disabling the anti-theft and also retain the low speed fan and other engine related functions normally handled by the BCM.
Re: BCM Simulator
Can you send me some details also. Will it work with a ls1 pcm & vy dash cluster.thanks Ron.
- VL400
- Posts: 4991
- Joined: Sun Mar 01, 2009 2:54 pm
- cars: VL Calais and Toyota Landcruiser. Plus some toys :)
- Location: Perth, WA
- Contact:
Re: BCM Simulator
I have only just got a PIM for testing with a LSx PCM so at this stage I would say no it does not support the LS1 sorry. It also wont work without a PIM either as this simulator is only ALDL.
Re: BCM Simulator
I was under the impression the pcm talks vpw to the pim then aldl from pim to bcm & dash?
If not what is the chain of communication protocols.thanks.
If not what is the chain of communication protocols.thanks.