BCM Simulator
- VL400
- Posts: 4991
- Joined: Sun Mar 01, 2009 2:54 pm
- cars: VL Calais and Toyota Landcruiser. Plus some toys :)
- Location: Perth, WA
- Contact:
BCM Simulator
Another early prototype I thought people might be interested in
Its a BCM simulator for VR to VY engines when doing conversions - and it will be affordable! It links to VT and later PCMs and simulates a valid key for VR and VS to disable VATS, gives a CEL on VT and later, low speed fan for VS and later, A/C control and passes it to the PCM so it knows the request has come in on VT and later. On VT and later PCMs you can have a dash hooked up to the bus and it will work. Basically does all the BCM stuff thats engine related.
More to come
Its a BCM simulator for VR to VY engines when doing conversions - and it will be affordable! It links to VT and later PCMs and simulates a valid key for VR and VS to disable VATS, gives a CEL on VT and later, low speed fan for VS and later, A/C control and passes it to the PCM so it knows the request has come in on VT and later. On VT and later PCMs you can have a dash hooked up to the bus and it will work. Basically does all the BCM stuff thats engine related.
More to come
- Holden202T
- Posts: 10311
- Joined: Sat Feb 28, 2009 9:05 pm
- Location: Tenambit, NSW
- Contact:
Re: BCM Simulator
very keep to see some testing results on some different conversions, shame i don't still have the ecotec torana, was a small need for it on that to make things more "proper"
No matter what the question is, the answer is always more horsepower!
Just starting out? Have a read of the getting started guide
Basic tuning of a delco ECM with $12P thread
Advanced tuning of a delco ECM with $12P thread
Just starting out? Have a read of the getting started guide
Basic tuning of a delco ECM with $12P thread
Advanced tuning of a delco ECM with $12P thread
- delcowizzid
- Posts: 5493
- Joined: Sat Feb 28, 2009 8:38 pm
- Location: Wellington NZ
- Contact:
Re: BCM Simulator
nice little unit bet this gets used lots will it make an 808 run a VT dash LOL
If Its Got Gas Or Ass Count Me In.if it cant be fixed with a hammer you have an electrical problem
-
- Posts: 1215
- Joined: Sun Mar 15, 2009 10:20 am
- cars: 2004 VYII Acclaim Wagon V6 Auto LPG/Petrol
2004 VYII Berlina sedan V6 Auto
2005 VZ Monaro CV8 manual - Location: Geelong, VIC
Re: BCM Simulator
Very nice
- krusty
- Posts: 570
- Joined: Wed Jan 27, 2010 9:45 pm
- cars: VY Calais guzzler, Toyota Corolla almost hybrid
- Location: Melbourne, VIC
Re: BCM Simulator
I'll take one, maybe two. I need to get $07 up and running on my VY L67 asap.
Geez there's some smart cookies around
Geez there's some smart cookies around
- Holden202T
- Posts: 10311
- Joined: Sat Feb 28, 2009 9:05 pm
- Location: Tenambit, NSW
- Contact:
Re: BCM Simulator
there sure is, and hes the chosen one, cause he can read the delco matrix fluently!!
No matter what the question is, the answer is always more horsepower!
Just starting out? Have a read of the getting started guide
Basic tuning of a delco ECM with $12P thread
Advanced tuning of a delco ECM with $12P thread
Just starting out? Have a read of the getting started guide
Basic tuning of a delco ECM with $12P thread
Advanced tuning of a delco ECM with $12P thread
- VL400
- Posts: 4991
- Joined: Sun Mar 01, 2009 2:54 pm
- cars: VL Calais and Toyota Landcruiser. Plus some toys :)
- Location: Perth, WA
- Contact:
Re: BCM Simulator
Not even Neo can read that matrix
Re: BCM Simulator
to smart for class
Re: BCM Simulator
The world just keeps getting better...
- VL400
- Posts: 4991
- Joined: Sun Mar 01, 2009 2:54 pm
- cars: VL Calais and Toyota Landcruiser. Plus some toys :)
- Location: Perth, WA
- Contact:
Re: BCM Simulator
Got some time to test out the BCM sim so thought some quick vids were in order
Linking a VY flash based PCM to allow a VATS locked PCM to work as if a valid key is being used. This is only done once to initially link the PCM and BCM sim. Red is power LED, yellow is data and green flashes once the linking is complete ...
CEL controlled by the BCM sim on a VY flash PCM ...
The sim also has all the usual bus chatter between the BCM and PCM, this means any TP ADX that looks for heartbeat and BCM chatter tool will work just like on a vehicle from the factory. It does not request data from the ABS or SRS systems.
Linking a VY flash based PCM to allow a VATS locked PCM to work as if a valid key is being used. This is only done once to initially link the PCM and BCM sim. Red is power LED, yellow is data and green flashes once the linking is complete ...
CEL controlled by the BCM sim on a VY flash PCM ...
The sim also has all the usual bus chatter between the BCM and PCM, this means any TP ADX that looks for heartbeat and BCM chatter tool will work just like on a vehicle from the factory. It does not request data from the ABS or SRS systems.
Code: Select all
38:04.772: Com timeout: Expecting frame header byte
38:04.777: No chatter found
38:04.818: (38:04.802)$40,$58,$4D,$50,$52,$79
38:04.834: (38:04.820)$41,$68,$12,$00,$00,$00,$14,$00,$00,$00,$00,$B8,$C5,$00,$00,$10,$00,$00,$00,$00,$00,$A4
38:04.866: (38:04.850)$11,$5C,$FF,$00,$00,$00,$10,$00,$00,$84
38:04.945: (38:04.929)$40,$58,$4D,$50,$52,$79
38:04.961: (38:04.948)$41,$68,$12,$00,$00,$00,$14,$00,$00,$00,$00,$B8,$C5,$00,$00,$10,$00,$00,$00,$00,$00,$A4
38:04.977: (38:04.977)$08,$55,$A3
38:05.072: Com timeout: Expecting frame header byte
38:05.074: No chatter found
38:05.105: (38:05.105)$40,$58,$4D,$50,$52,$79
38:05.137: (38:05.109)$41,$68,$12,$00,$00,$00,$14,$00,$00,$00,$00,$B8,$C5,$00,$00,$10,$00,$00,$00,$00,$00,$A4
38:05.169: (38:05.153)$11,$5C,$FF,$00,$00,$00,$10,$00,$00,$84
38:05.233: (38:05.233)$40,$58,$4D,$50,$52,$79
38:05.265: (38:05.249)$41,$68,$12,$00,$00,$00,$14,$00,$00,$00,$00,$B8,$C5,$00,$00,$10,$00,$00,$00,$00,$00,$A4
38:05.281: (38:05.268)$08,$55,$A3
38:05.382: Com timeout: Expecting frame header byte
38:05.387: No chatter found
38:05.409: (38:05.409)$40,$58,$4D,$50,$52,$79
38:05.441: (38:05.413)$41,$68,$12,$00,$00,$00,$14,$00,$00,$00,$01,$B8,$C5,$00,$00,$10,$00,$00,$00,$00,$00,$A3
38:05.457: (38:05.457)$11,$5C,$FF,$00,$00,$00,$10,$00,$00,$84
38:05.537: (38:05.537)$40,$58,$4D,$50,$52,$79
38:05.569: (38:05.541)$41,$68,$12,$00,$00,$00,$14,$41,$00,$00,$01,$B8,$C5,$00,$00,$10,$00,$00,$00,$00,$00,$62
38:05.575: (38:05.575)$08,$55,$A3
38:05.672: Com timeout: Expecting frame header byte
38:05.678: No chatter found
38:05.713: (38:05.697)$40,$58,$4D,$50,$52,$79
38:05.729: (38:05.718)$41,$68,$12,$00,$00,$00,$14,$41,$00,$00,$01,$B8,$C5,$00,$00,$10,$00,$00,$00,$00,$00,$62
38:05.761: (38:05.745)$11,$5C,$FF,$00,$00,$00,$10,$00,$00,$84
38:05.841: (38:05.825)$40,$58,$4D,$50,$52,$79
38:05.873: (38:05.846)$41,$68,$12,$00,$00,$00,$14,$41,$00,$00,$01,$B8,$C5,$00,$00,$10,$00,$00,$00,$00,$00,$62
38:05.877: (38:05.877)$08,$55,$A3
38:05.972: Com timeout: Expecting frame header byte
38:05.978: No chatter found
38:06.001: (38:06.001)$40,$58,$4D,$50,$52,$79
38:06.033: (38:06.017)$41,$68,$12,$00,$00,$00,$14,$41,$00,$00,$01,$B8,$C5,$00,$00,$10,$00,$00,$00,$00,$00,$62
38:06.065: (38:06.049)$11,$5C,$FF,$00,$00,$00,$10,$00,$00,$84
38:06.145: (38:06.129)$40,$58,$4D,$50,$52,$79
38:06.161: (38:06.147)$41,$68,$12,$00,$00,$00,$14,$41,$00,$00,$01,$B8,$C5,$00,$00,$10,$00,$00,$00,$00,$00,$62
38:06.177: (38:06.177)$08,$55,$A3