LS1 ADX V1.6 to suit Tunercat OBD2 Cable, AVT 852

160 And 8192 Baud Aldl
User avatar
Posts: 2572
Joined: Sun Mar 01, 2009 8:59 am
Location: North Coast, NSW

Re: LS1 ADX V1.6 to suit Tunercat OBD2 Cable, AVT 852

Postby Jayme » Thu Dec 05, 2013 11:17 am

the baud rate the cable uses will be really high, like 230400 sort of high... which adx were you using? the standard one or the DPID one? the only way I can think of help is to get you do monitor the serial port while trying to use the adx...

Posts: 10
Joined: Tue Dec 03, 2013 8:37 am

Re: LS1 ADX V1.6 to suit Tunercat OBD2 Cable, AVT 852

Postby tuningmonkey » Thu Dec 05, 2013 12:53 pm

AVT-852

So should I set the baud rate to max in the OS? I think I tried that earlier.

I'm in the process of installing SUDT as antus suggested. I'll forward you both the log files as soon as I get some.

Thanks!!!

Site Admin
User avatar
Posts: 6280
Joined: Sat Feb 28, 2009 8:34 pm

Re: LS1 ADX V1.6 to suit Tunercat OBD2 Cable, AVT 852

Postby antus » Thu Dec 05, 2013 1:51 pm

No, in the case of the AVT devices the virtual comport just runs at USB speed regardless of the setting. Thus the speed setting can be ignored.
Have you read the FAQ? For lots of information and links to significant threads see here: viewtopic.php?f=7&t=1396

User avatar
Posts: 34
Joined: Sat May 12, 2012 3:00 am
Location: Philadelphia, PA

Re: LS1 ADX V1.6 to suit Tunercat OBD2 Cable, AVT 852

Postby durahax » Wed Feb 19, 2014 2:30 pm

It works, walking out the door right now but it works in ALDLdroid with a AVT-855! I'm trying on a Duramax PCM but it works I can see all the data on the bus. Now I have a reason to finish my ADX.

ImageImageImageImageImageImage

User avatar
Posts: 2572
Joined: Sun Mar 01, 2009 8:59 am
Location: North Coast, NSW

Re: LS1 ADX V1.6 to suit Tunercat OBD2 Cable, AVT 852

Postby Jayme » Tue Jan 06, 2015 9:01 pm

so I played around with my DPID adx and got it working. was a few differences with how aldldroid handled align to header, so had to use an avt filter instead and rejigger all the packet alignments. its now vpwdroid hahaha.

also updated first post with new adx.
AVT LS1 DPID V1.06-aldldroid.adx
(54.28 KiB) Downloaded 336 times

User avatar
Posts: 5304
Joined: Sat Feb 28, 2009 8:38 pm
Location: Wellington NZ

Re: LS1 ADX V1.6 to suit Tunercat OBD2 Cable, AVT 852

Postby delcowizzid » Tue Jan 06, 2015 9:36 pm

nice lol
If Its Got Gas Or Ass Count Me In.if it cant be fixed with a hammer you have an electrical problem

Site Admin
User avatar
Posts: 6280
Joined: Sat Feb 28, 2009 8:34 pm

Re: LS1 ADX V1.6 to suit Tunercat OBD2 Cable, AVT 852

Postby antus » Tue Jan 06, 2015 9:37 pm

Awesome! Screenshots? :thumbup:
Have you read the FAQ? For lots of information and links to significant threads see here: viewtopic.php?f=7&t=1396

User avatar
Posts: 2572
Joined: Sun Mar 01, 2009 8:59 am
Location: North Coast, NSW

Re: LS1 ADX V1.6 to suit Tunercat OBD2 Cable, AVT 852

Postby Jayme » Wed Jan 07, 2015 8:18 am

thought I had an adx error with speedo showing 0kph. turns out in aldldroid I chose the gps speedo and left the gps off :comp:

Screenshot_2015-01-07-08-45-57.png
Screenshot_2015-01-07-08-45-57.png (464.24 KiB) Viewed 12338 times

Screenshot_2015-01-07-08-47-01.png
Screenshot_2015-01-07-08-47-01.png (183.57 KiB) Viewed 12338 times

Site Admin
User avatar
Posts: 6280
Joined: Sat Feb 28, 2009 8:34 pm

Re: LS1 ADX V1.6 to suit Tunercat OBD2 Cable, AVT 852

Postby antus » Wed Jan 07, 2015 10:22 am

Good stuff! :thumbup:
Have you read the FAQ? For lots of information and links to significant threads see here: viewtopic.php?f=7&t=1396

Posts: 3202
Joined: Mon Aug 02, 2010 6:35 pm

Re: LS1 ADX V1.6 to suit Tunercat OBD2 Cable, AVT 852

Postby Dylan » Tue May 19, 2015 4:31 pm

Sorry for thread hopping didn't want to clutter your other thread.

If I log my VZ LS1 with this ADX. What would the throttle position be displayed as?
Now I'm more keen to get an AVT852. Got wideband already.
Besides tuner cats what would you recomend to re flash my 1mb PCM?

PreviousNext

Return to ALDL, OBDII Logging and Scanning

Who is online

Users browsing this forum: No registered users and 2 guests