GM Reverse Engineering

160 And 8192 Baud Aldl
User avatar
Gareth
Posts: 2505
Joined: Fri Mar 14, 2014 8:37 pm
Location: Bacchus Marsh, Vic

Re: GM Reverse Engineering

Post by Gareth »

Cool, but what about battery life? Is it all worth it? Genuine are being sold in bulk by GM and are quickly becoming NLA...
According to chemistry, alcohol is a solution...
User avatar
Tazzi
Posts: 3422
Joined: Thu May 17, 2012 8:53 pm
cars: VE SS Ute
Location: WA
Contact:

Re: GM Reverse Engineering

Post by Tazzi »

Biggvl wrote:Cool, but what about battery life? Is it all worth it? Genuine are being sold in bulk by GM and are quickly becoming NLA...
Nah, definitely not worth it in this day of age, tonnes of new keys available!

I cant see the keys going out of stock in (many) years. Especially which aftermarket keys from places like MAP which work perfectly.
Your Local Aussie Reverse Engineer
Contact for Software/Hardware development and Reverse Engineering
Site:https://www.envyouscustoms.com
Mob:+61406 140 726
Image
User avatar
antus
Site Admin
Posts: 8237
Joined: Sat Feb 28, 2009 8:34 pm
cars: TX Gemini 2L Twincam
TX Gemini SR20 18psi
Datsun 1200 Ute
Subaru Blitzen '06 EZ30 4th gen, 3.0R Spec B
Contact:

Re: GM Reverse Engineering

Post by antus »

Cool, good work!
Have you read the FAQ? For lots of information and links to significant threads see here: http://pcmhacking.net/forums/viewtopic.php?f=7&t=1396
User avatar
Tazzi
Posts: 3422
Joined: Thu May 17, 2012 8:53 pm
cars: VE SS Ute
Location: WA
Contact:

Re: GM Reverse Engineering

Post by Tazzi »

Came across something I thought was a bit odd while doing a bit of R&D.

Been playing with changing/refitting BCM's between VE's in my own ute. Have been looking into a remote programmer to perform the linking and learn procedures all in one hit.

Anyways, Iv noticed that performing the 'brake pedal position relearn' in the BCM will cause a hard fault into the EBCM (ABS module). Even after doing multiple key ignitions, driving around for 10mins, leaving sit for an hour ect.. the fault stayed. Even disconnected the battery and reconnected, but it indicated the fault was still there. Everything was correct/learnt and functioning.. so there was no reason for any faults.

The actual fault that gets stored in the EBCM says something like "Brake pedal position not learnt". So it seems to learning procedure for the BCM makes the EBCM unhappy.

Easy fix.. just clear the fault.. and it never returns. But.. still odd that it has to be done even though theres no actual issue in the car. Usually the EBCM automatically removes faults once fixed or after a few ignition cycles to indicate the issue is no longer present but this made it do a permanent fault log, which is normally only the airbag system does.

It obvious to try clear the fault.. but it should be required in the first place!
Your Local Aussie Reverse Engineer
Contact for Software/Hardware development and Reverse Engineering
Site:https://www.envyouscustoms.com
Mob:+61406 140 726
Image
Post Reply