ALDL Logger V2

[delcowizzid]

Aldldroid and a cheap smartphone works in a pinch

[vp304]

Delcowizzid yeah ive seen that before may have to give it a go.
I have a aldl usb interface from you guys what else besides the software do i need to hook up to a old android phone say ?
I see on videos it plugs into bottom of the phone charging port. Does it just go from say a charging cable straight into the bottom of the port on my usb aldl and i load the software up and connect and good to go ?

[VK_3800]

You need host USB capability, a lot of old phones didn't have this (anything advertised as supporting USB OTG should work). I just use a cheap 7" tablet which does the trick fine. You'll probably need an adapter for the USB cable but otherwise yes just plug in and connect (with $11P or $12P running the ECU).

[vp304]

Vk3800 thanks for the info
On 11p already. Have a sony android radio with 7 inch screen already in my car.
But think i can only doing it to my screen by using android auto of my phone to project it onto my radio receivers in car screen.

[immortality]

Anybody used their V2 datalogger with the latest version of Tunerpro?

I haven't used the logger in a while, changed over to a micro SD card with adaptor and lost all the data on the old SD card (My laptop doesn't have a slot to read the old full size card).

I can run the logger in the car and get live data. Save the log but when I try and play it back in tunerpro I'm not getting anything, it's like it grabs the first frame of data from the log but nothing else beyond that.

[Charlescrown]

Are you usning the correct definition file for the logger files?

[immortality]

Yeah it's one VL400 did for me I believe.

[Charlescrown]

OK well I had the same problem by using the laptop with adapter file instead of the one specifically written for the logger. Apart from that I'm out and can't help.

[immortality]

This is with a Super6 VX so I don't think there was ever a specific file written by VL400, just one he looked over for me.

[Holden202T]

yeah ive had issues like that pretty regularly, if you dont load the right adx is just doesnt show any of the data.

i've also found once you load the right adx you need to load another file then re-load the original file before it will display.