TunerPro RT data errors
Re: TunerPro RT data errors
i just went and double checked all the old enhanced versions, but echo has been on always on all models.
Re: TunerPro RT data errors
Which is why their (well, only tried the VS one) data looked good.The1 wrote:i just went and double checked all the old enhanced versions, but echo has been on always on all models.
Joe.
Re: TunerPro RT data errors
Iv never had dramas except for the VS currently on bench.The1 wrote:i just went and double checked all the old enhanced versions, but echo has been on always on all models.
Could have been only the VS that was affected?
The VU_VX_VY V6 flash ecu defition files work great. The none enhanced adx files can take a few hit'n miss to get it synced up. But your enhanced version literally worked flawlessly a good 15times in a row!
Your Local Aussie Reverse Engineer
Contact for Software/Hardware development and Reverse Engineering
Site:https://www.envyouscustoms.com
Mob:+61406 140 726
Contact for Software/Hardware development and Reverse Engineering
Site:https://www.envyouscustoms.com
Mob:+61406 140 726
Re: TunerPro RT data errors
nar i checked all previous versions of enhanced adx for vs and they all have echo on. Perhaps thinking of the old innovate or 14.7 adx's i used to have ages ago which they didn't at one point perhaps.
Yeh i havn't been able to get vx/vy to fail to connect, it kicks the bcm off everytime and connects without error. though it does have a break on fail/connect with chatter.
Perhaps try the same with the vs n/a if you can.
Yeh i havn't been able to get vx/vy to fail to connect, it kicks the bcm off everytime and connects without error. though it does have a break on fail/connect with chatter.
Perhaps try the same with the vs n/a if you can.
- Attachments
-
- VS_V6_$51_Enhanced_v1.4e.adx
- (155.82 KiB) Downloaded 326 times
Re: TunerPro RT data errors
Just to clarify any confusion, it was the files "Vs V6 engine and trans 1.09-tp5 - Credit to Jayme.adx" and "Vs V6 engine and trans 1.10-tp5 - Credit to Jayme.adx" that didn't have the Echo option set. Hence the bogus data displayed by TP RT.
Joe.
Joe.
Re: TunerPro RT data errors
To clarify that, the original troublesome file is: "Vs V6 engine and trans 1.07-tp5.adx" which still has the echo option off. Attached is the original files.j_ds_au wrote:Just to clarify any confusion, it was the files "Vs V6 engine and trans 1.09-tp5 - Credit to Jayme.adx" and "Vs V6 engine and trans 1.10-tp5 - Credit to Jayme.adx" that didn't have the Echo option set. Hence the bogus data displayed by TP RT.
Joe.
The v1.08,1.09 and 1.10 were all attempts in fixing the timing issues. Which, really was the echo! (and maybe the timing a little! )
- Attachments
-
- Vs V6 engine and trans 1.07-tp5.adx
- (101.98 KiB) Downloaded 332 times
Your Local Aussie Reverse Engineer
Contact for Software/Hardware development and Reverse Engineering
Site:https://www.envyouscustoms.com
Mob:+61406 140 726
Contact for Software/Hardware development and Reverse Engineering
Site:https://www.envyouscustoms.com
Mob:+61406 140 726
Re: TunerPro RT data errors
ok cool, so the current enhanced ones are all good?
Re: TunerPro RT data errors
Works perfectly!The1 wrote:ok cool, so the current enhanced ones are all good?
Your Local Aussie Reverse Engineer
Contact for Software/Hardware development and Reverse Engineering
Site:https://www.envyouscustoms.com
Mob:+61406 140 726
Contact for Software/Hardware development and Reverse Engineering
Site:https://www.envyouscustoms.com
Mob:+61406 140 726
Re: TunerPro RT data errors
awesome
Re: TunerPro RT data errors
I just yesterday tried the new adx for $51 VS supercharged.... no more data errors!
Previously I was getting a massive number of error counts, nothing I did would make a difference. But it did manage to log enough to adjust things.
My system uses the ch340 driver/serial chip.
I actually thought I had a earthing problem or something in my wiring, or my dodgy daisy chain of usb-rs232-aldl bits.
Thanks 'The1' I use both your enhanced code and adx for the VK T5 L67. No wideband yet.. but soon.
Cheers.
Sean.
Previously I was getting a massive number of error counts, nothing I did would make a difference. But it did manage to log enough to adjust things.
My system uses the ch340 driver/serial chip.
I actually thought I had a earthing problem or something in my wiring, or my dodgy daisy chain of usb-rs232-aldl bits.
Thanks 'The1' I use both your enhanced code and adx for the VK T5 L67. No wideband yet.. but soon.
Cheers.
Sean.