Hi.
I need "DATA STREAM SPECIFICATION" for ECM 1227808 (160 baud, bin AMXY0662) to make a normal 1227808.adx-file, that there is here in the forum does not work, probably wrong.
I will be very grateful.
I found some information, but not sure that it is correct. (Data taken from menu WinALDL).
Moreover, data is incomplete.
Please be supplemented, if anyone can, please.
DATA STREAM SPECIFICATION for 1227808
DATA STREAM SPECIFICATION for 1227808
Last edited by fad2629 on Wed Sep 30, 2015 9:05 pm, edited 1 time in total.
Re: DATA STREAM SPECIFICATION for 1227808
It would be well worth your time setting up a bin in 12P with the settings from the AMXY bin.
There's a fully defined XDF and ADX files already. Also you would then get 8192 baud data.
There's a fully defined XDF and ADX files already. Also you would then get 8192 baud data.
Re: DATA STREAM SPECIFICATION for 1227808
This, of course, it would be great, and if still to get NVRAM...(This dream)
To do this, fasten "delco_808_comms_mod_rs232", I do not have such a possibility.
To do this, fasten "delco_808_comms_mod_rs232", I do not have such a possibility.
- antus
- Site Admin
- Posts: 8250
- Joined: Sat Feb 28, 2009 8:34 pm
- cars: TX Gemini 2L Twincam
TX Gemini SR20 18psi
Datsun 1200 Ute
Subaru Blitzen '06 EZ30 4th gen, 3.0R Spec B - Contact:
Re: DATA STREAM SPECIFICATION for 1227808
You dont need the nvram, just the comms mod. And you can home brew the coms mod. Then you are back where you started but much better software and definitions.
Lada ecm on a v6?
Lada ecm on a v6?
Have you read the FAQ? For lots of information and links to significant threads see here: http://pcmhacking.net/forums/viewtopic.php?f=7&t=1396
Re: DATA STREAM SPECIFICATION for 1227808
antus wrote:You dont need the nvram, just the comms mod. And you can home brew the coms mod. Then you are back where you started but much better software and definitions.
Lada ecm on a v6?
Lada has ECM Bosch.
I have Opel-Multec injection system (this is TBI like Holden Astra LD) installed on the engine Peugeot.This is a hobby for the weekend.
So, if these do not have such professors of tuning the data no one?
Offtop.
I jump O2 sensor readings, is this normal?
And what is the IFR?
log recorded WinALDL.
- antus
- Site Admin
- Posts: 8250
- Joined: Sat Feb 28, 2009 8:34 pm
- cars: TX Gemini 2L Twincam
TX Gemini SR20 18psi
Datsun 1200 Ute
Subaru Blitzen '06 EZ30 4th gen, 3.0R Spec B - Contact:
Re: DATA STREAM SPECIFICATION for 1227808
That data looks correct. I think the 160 baud definition you have is correct but you could also try the definition in this techedge toolhttp://wbo2.com/~techedge.com.au/vehicle/aldl160/aldl_sw.htm
I think the 02 looks like its probably volts so .8 is 800mv is rich and .4 is lean. The car will swing rich to lean in closed loop faster than you can see at 160 baud though.
I think the 02 looks like its probably volts so .8 is 800mv is rich and .4 is lean. The car will swing rich to lean in closed loop faster than you can see at 160 baud though.
Have you read the FAQ? For lots of information and links to significant threads see here: http://pcmhacking.net/forums/viewtopic.php?f=7&t=1396
Re: DATA STREAM SPECIFICATION for 1227808
Thank you, antus!
About jumping O2 sensor readings I understood.
Sample definition file download The link does not work
About jumping O2 sensor readings I understood.
Sample definition file download The link does not work