Maybe im having driver issues? i do know that i was getting all sorts of weird logs when i first connected, i went into the drivers list and seen that a mouse was trying to use com port 10 same port that ftdi driver was... i disabled the mouse and logs were ok except intermitent data issuesTazzi wrote:All normal.. I dont see any problems at all. Heartbeat is constant.
Cant see any reason why its having dramas.
Vx v6 not getting bin
- hsv08
- Posts: 547
- Joined: Thu May 09, 2013 6:50 pm
- cars: (EX) VT SENATOR 355 STROKER
(EX) VT SS 304 MANUAL
NOW VX V6 HACK
Re: Vx v6 not getting bin
- hsv08
- Posts: 547
- Joined: Thu May 09, 2013 6:50 pm
- cars: (EX) VT SENATOR 355 STROKER
(EX) VT SS 304 MANUAL
NOW VX V6 HACK
Re: Vx v6 not getting bin
im honestly considering doing the vt pcm mod to get away from flash, hate these flash pcms
- hsv08
- Posts: 547
- Joined: Thu May 09, 2013 6:50 pm
- cars: (EX) VT SENATOR 355 STROKER
(EX) VT SS 304 MANUAL
NOW VX V6 HACK
Re: Vx v6 not getting bin
Just looking at my anti virus............
Do you think this is causing it even though its still connecting to the pcm but not waning to pull the bin or cal?
Do you think this is causing it even though its still connecting to the pcm but not waning to pull the bin or cal?
- Attachments
-
- Capture.PNG (612.61 KiB) Viewed 6376 times
Re: Vx v6 not getting bin
ive had the mouse driver bug issue before ive just had to disable the mouse thing in device manager then it all works fine.
-
- Posts: 186
- Joined: Fri Jul 09, 2010 10:01 pm
- cars: VY s L67
Haines Hunter - not a car but still a toy
Re: Vx v6 not getting bin
Must be something silly i have only ever had one issue when using the flash tool and i just needed to pull power to the PCM for a few min and it came good.
Even then i think it may have even been my fault that the issue occurred.
That's on my VY flash PCM
Even then i think it may have even been my fault that the issue occurred.
That's on my VY flash PCM
- hsv08
- Posts: 547
- Joined: Thu May 09, 2013 6:50 pm
- cars: (EX) VT SENATOR 355 STROKER
(EX) VT SS 304 MANUAL
NOW VX V6 HACK
Re: Vx v6 not getting bin
I got a tiny bit further todayThe1 wrote:ive had the mouse driver bug issue before ive just had to disable the mouse thing in device manager then it all works fine.
12:38:06 p.m. FlashTool Version 0.1.5.1 Program Loading...
12:38:06 p.m. Program Ready
12:38:10 p.m. Starting Connect To Device...
12:38:10 p.m. COM10 Open
12:38:10 p.m. Check if Logger V2 in partial passthrough mode
12:38:10 p.m. Not a logger V2
12:38:10 p.m. COM10 Port open already
12:38:10 p.m. Waiting For HeartBeat...
12:38:10 p.m. Found A HeartBeat Frame, Timer Started
12:38:10 p.m. Found Another HeartBeat Frame After 286mS
12:38:10 p.m. Waiting For 15ms Of Silence With 300ms Timeout
12:38:10 p.m. Silence Detected
12:38:10 p.m. Requesting Chatter To Be Disabled For Device F1
12:38:11 p.m. No Response
12:38:11 p.m. COM10 Port open already
12:38:11 p.m. Waiting For HeartBeat...
12:38:11 p.m. Found A HeartBeat Frame, Timer Started
12:38:11 p.m. Found Another HeartBeat Frame After 303mS
12:38:11 p.m. Waiting For 15ms Of Silence With 300ms Timeout
12:38:11 p.m. Silence Detected
12:38:11 p.m. Requesting Chatter To Be Disabled For Device F1
12:38:11 p.m. Chatter Disabled
12:38:11 p.m. Waiting For 15ms Of Silence With 300ms Timeout
12:38:11 p.m. Silence Detected
12:38:11 p.m. Requesting Chatter To Be Disabled For Device F7
12:38:11 p.m. Chatter Disabled
12:38:11 p.m. Searching For OSE Device...
12:38:11 p.m. Searching For ECM...Attempt 1...
12:38:11 p.m. Request Sent
12:38:11 p.m. Device Found, Identifying...
12:38:11 p.m. Found Something, But Not OSE Device...
12:38:11 p.m. Searching For RT Modified Factory Device...
12:38:11 p.m. Searching For ECM...Attempt 1...
12:38:11 p.m. Request Sent
12:38:11 p.m. Device Found, Identifying...
12:38:11 p.m. Searching For RT Modified Factory Device...
12:38:11 p.m. Searching For ECM...Attempt 1...
12:38:11 p.m. Request Sent
12:38:11 p.m. Device Found, Identifying...
12:38:11 p.m. Searching For RT Modified Factory Device...
12:38:11 p.m. Searching For ECM...Attempt 1...
12:38:11 p.m. Request Sent
12:38:11 p.m. Device Found, Identifying...
12:38:11 p.m. Searching For Kalmaker Devices...
12:38:11 p.m. Searching For Kalmaker SP3
12:38:11 p.m. Searching For ECM...Attempt 1...
12:38:11 p.m. Request Sent
12:38:11 p.m. Device Found, Identifying...
12:38:11 p.m. Searching For Kalmaker WDS00
12:38:11 p.m. Searching For ECM...Attempt 1...
12:38:11 p.m. Request Sent
12:38:11 p.m. Device Found, Identifying...
12:38:11 p.m. Searching For Kalmaker WDS20/WDS21/WDS30
12:38:11 p.m. Searching For ECM...Attempt 1...
12:38:11 p.m. Request Sent
12:38:11 p.m. Device Found, Identifying...
12:38:11 p.m. Searching For Kalmaker WDS40/WDS41/WDS60/WDS61/WDS70
12:38:11 p.m. Searching For ECM...Attempt 1...
12:38:11 p.m. Request Sent
12:38:12 p.m. Device Found, Identifying...
12:38:12 p.m. Searching For Kalmaker WDS65
12:38:12 p.m. Searching For ECM...Attempt 1...
12:38:12 p.m. Request Sent
12:38:12 p.m. Device Found, Identifying...
12:38:12 p.m. Searching For Kalmaker WDS50/WDS51
12:38:12 p.m. Searching For ECM...Attempt 1...
12:38:12 p.m. Request Sent
12:38:12 p.m. Device Found, Identifying...
12:38:12 p.m. Searching For Kalmaker WDSB3/WDSB4/WDSB5
12:38:12 p.m. Searching For ECM...Attempt 1...
12:38:12 p.m. Request Sent
12:38:12 p.m. Device Found, Identifying...
12:38:12 p.m. Searching For Kalmaker BDS60
12:38:12 p.m. Searching For ECM...Attempt 1...
12:38:12 p.m. Request Sent
12:38:12 p.m. Device Found, Identifying...
12:38:12 p.m. Searching For Factory Devices...
12:38:12 p.m. Searching For ECM...Attempt 1...
12:38:12 p.m. Request Sent
12:38:12 p.m. Device Found, Identifying...
12:38:12 p.m. Requesting Security Seed
12:38:12 p.m. Security Seed Is 519C
12:38:12 p.m. Security Key Is F6FC
12:38:12 p.m. Sending Security Key
12:38:12 p.m. Security Passed, PCM Unlocked
12:38:12 p.m. Waiting For 15ms Of Silence With 300ms Timeout
12:38:12 p.m. Silence Detected
12:38:12 p.m. Requesting Chatter To Be Enabled For Device F7
12:38:12 p.m. Chatter Enabled
12:38:12 p.m. Waiting For 15ms Of Silence With 300ms Timeout
12:38:12 p.m. Silence Detected
12:38:12 p.m. Requesting Chatter To Be Enabled For Device F1
12:38:12 p.m. Chatter Enabled
12:38:12 p.m. Found VX Flash PCM, BCC: DMTY
12:38:12 p.m. VIN Of Connected Vehicle: 6H8VXL35A1L734610
12:38:12 p.m. COM10 closed
12:38:15 p.m. Starting Get Bin From ECM...
12:38:15 p.m. COM10 Open
12:38:15 p.m. Waiting For HeartBeat...
12:38:15 p.m. Found A HeartBeat Frame, Timer Started
12:38:16 p.m. Found Another HeartBeat Frame After 311mS
12:38:16 p.m. Waiting For 15ms Of Silence With 300ms Timeout
12:38:16 p.m. Silence Detected
12:38:16 p.m. Requesting Chatter To Be Disabled For Device F1
12:38:16 p.m. Chatter Disabled
12:38:16 p.m. Waiting For 15ms Of Silence With 300ms Timeout
12:38:16 p.m. Silence Detected
12:38:16 p.m. Requesting Chatter To Be Disabled For Device F7
12:38:16 p.m. Chatter Disabled
12:38:16 p.m. Requesting Security Seed
12:38:16 p.m. Security Has Already Been Passed, PCM Unlocked
12:38:16 p.m. Requesting Mode 5/6 Access
12:38:16 p.m. Mode 5/6 Access Allowed
12:38:16 p.m. No Response
12:38:17 p.m. No Response
12:38:17 p.m. No Response
12:38:18 p.m. No Response
12:38:18 p.m. No Response
12:38:19 p.m. No Response
12:38:19 p.m. No Response
12:38:19 p.m. No Response
12:38:20 p.m. No Response
12:38:20 p.m. No Response
12:38:20 p.m. Waiting For 15ms Of Silence With 300ms Timeout
12:38:20 p.m. Silence Detected
12:38:20 p.m. Requesting Chatter To Be Enabled For Device F7
12:38:20 p.m. No Response
12:38:20 p.m. Waiting For 15ms Of Silence With 300ms Timeout
12:38:20 p.m. Silence Detected
12:38:20 p.m. Requesting Chatter To Be Enabled For Device F7
12:38:21 p.m. No Response
12:38:21 p.m. Waiting For 15ms Of Silence With 300ms Timeout
12:38:21 p.m. Silence Detected
12:38:21 p.m. Requesting Chatter To Be Enabled For Device F7
12:38:21 p.m. No Response
12:38:21 p.m. Waiting For 15ms Of Silence With 300ms Timeout
12:38:21 p.m. Silence Detected
12:38:21 p.m. Requesting Chatter To Be Enabled For Device F7
12:38:21 p.m. Chatter Enabled
12:38:21 p.m. Waiting For 15ms Of Silence With 300ms Timeout
12:38:21 p.m. Silence Detected
12:38:21 p.m. Requesting Chatter To Be Enabled For Device F1
12:38:21 p.m. Chatter Enabled
12:38:25 p.m. Binary Read Fail
12:38:25 p.m. COM10 Closed
12:39:11 p.m. Unable To Open Com Port
12:39:14 p.m. Cannot Detect HeartBeat So Not Disabling BCM Chatter
12:39:14 p.m. Unable To Open Com Port
12:39:15 p.m. Cannot Detect HeartBeat So Not Disabling BCM Chatter
12:39:15 p.m. Check if Logger V2 in partial passthrough mode
12:39:15 p.m. Not a logger V2
12:39:15 p.m. COM10 already closed
12:39:15 p.m. User Disconnected
12:39:48 p.m. Starting Connect To Device...
12:39:48 p.m. COM10 Open
12:39:48 p.m. Check if Logger V2 in partial passthrough mode
12:39:48 p.m. Not a logger V2
12:39:48 p.m. COM10 Port open already
12:39:48 p.m. Waiting For HeartBeat...
12:39:49 p.m. Found A HeartBeat Frame, Timer Started
12:39:49 p.m. Found Another HeartBeat Frame After 303mS
12:39:49 p.m. Waiting For 15ms Of Silence With 300ms Timeout
12:39:49 p.m. Silence Detected
12:39:49 p.m. Requesting Chatter To Be Disabled For Device F1
12:39:49 p.m. Chatter Disabled
12:39:49 p.m. Waiting For 15ms Of Silence With 300ms Timeout
12:39:49 p.m. Silence Detected
12:39:49 p.m. Requesting Chatter To Be Disabled For Device F7
12:39:49 p.m. Chatter Disabled
12:39:49 p.m. Searching For OSE Device...
12:39:49 p.m. Searching For ECM...Attempt 1...
12:39:49 p.m. Request Sent
12:39:49 p.m. Device Found, Identifying...
12:39:49 p.m. Found Something, But Not OSE Device...
12:39:49 p.m. Searching For RT Modified Factory Device...
12:39:49 p.m. Searching For ECM...Attempt 1...
12:39:49 p.m. Request Sent
12:39:49 p.m. Device Found, Identifying...
12:39:49 p.m. Searching For RT Modified Factory Device...
12:39:49 p.m. Searching For ECM...Attempt 1...
12:39:49 p.m. Request Sent
12:39:49 p.m. Device Found, Identifying...
12:39:49 p.m. Searching For RT Modified Factory Device...
12:39:49 p.m. Searching For ECM...Attempt 1...
12:39:49 p.m. Request Sent
12:39:49 p.m. Device Found, Identifying...
12:39:49 p.m. Searching For Kalmaker Devices...
12:39:49 p.m. Searching For Kalmaker SP3
12:39:49 p.m. Searching For ECM...Attempt 1...
12:39:49 p.m. Request Sent
12:39:49 p.m. Device Found, Identifying...
12:39:49 p.m. Searching For Kalmaker WDS00
12:39:49 p.m. Searching For ECM...Attempt 1...
12:39:49 p.m. Request Sent
12:39:49 p.m. Device Found, Identifying...
12:39:49 p.m. Searching For Kalmaker WDS20/WDS21/WDS30
12:39:49 p.m. Searching For ECM...Attempt 1...
12:39:49 p.m. Request Sent
12:39:49 p.m. Device Found, Identifying...
12:39:49 p.m. Searching For Kalmaker WDS40/WDS41/WDS60/WDS61/WDS70
12:39:49 p.m. Searching For ECM...Attempt 1...
12:39:49 p.m. Request Sent
12:39:49 p.m. Device Found, Identifying...
12:39:49 p.m. Searching For Kalmaker WDS65
12:39:49 p.m. Searching For ECM...Attempt 1...
12:39:49 p.m. Request Sent
12:39:49 p.m. Device Found, Identifying...
12:39:49 p.m. Searching For Kalmaker WDS50/WDS51
12:39:49 p.m. Searching For ECM...Attempt 1...
12:39:49 p.m. Request Sent
12:39:49 p.m. Device Found, Identifying...
12:39:49 p.m. Searching For Kalmaker WDSB3/WDSB4/WDSB5
12:39:49 p.m. Searching For ECM...Attempt 1...
12:39:49 p.m. Request Sent
12:39:49 p.m. Device Found, Identifying...
12:39:49 p.m. Searching For Kalmaker BDS60
12:39:49 p.m. Searching For ECM...Attempt 1...
12:39:49 p.m. Request Sent
12:39:49 p.m. Device Found, Identifying...
12:39:49 p.m. Searching For Factory Devices...
12:39:49 p.m. Searching For ECM...Attempt 1...
12:39:49 p.m. Request Sent
12:39:49 p.m. Device Found, Identifying...
12:39:49 p.m. Requesting Security Seed
12:39:50 p.m. Security Seed Is 519C
12:39:50 p.m. Security Key Is F6FC
12:39:50 p.m. Sending Security Key
12:39:50 p.m. Security Passed, PCM Unlocked
12:39:50 p.m. Waiting For 15ms Of Silence With 300ms Timeout
12:39:50 p.m. Silence Detected
12:39:50 p.m. Requesting Chatter To Be Enabled For Device F7
12:39:50 p.m. Chatter Enabled
12:39:50 p.m. Waiting For 15ms Of Silence With 300ms Timeout
12:39:50 p.m. Silence Detected
12:39:50 p.m. Requesting Chatter To Be Enabled For Device F1
12:39:50 p.m. Chatter Enabled
12:39:50 p.m. Found VX Flash PCM, BCC: DMTY
12:39:50 p.m. VIN Of Connected Vehicle: 6H8VXL35A1L734610
12:39:50 p.m. COM10 closed
12:39:52 p.m. Starting Get Bin From ECM...
12:39:52 p.m. COM10 Open
12:39:52 p.m. Waiting For HeartBeat...
12:39:52 p.m. Found A HeartBeat Frame, Timer Started
12:39:52 p.m. Found Another HeartBeat Frame After 303mS
12:39:52 p.m. Waiting For 15ms Of Silence With 300ms Timeout
12:39:52 p.m. Silence Detected
12:39:52 p.m. Requesting Chatter To Be Disabled For Device F1
12:39:52 p.m. Chatter Disabled
12:39:52 p.m. Waiting For 15ms Of Silence With 300ms Timeout
12:39:52 p.m. Silence Detected
12:39:52 p.m. Requesting Chatter To Be Disabled For Device F7
12:39:52 p.m. Chatter Disabled
12:39:52 p.m. Requesting Security Seed
12:39:53 p.m. Security Has Already Been Passed, PCM Unlocked
12:39:53 p.m. Requesting Mode 5/6 Access
12:39:53 p.m. Mode 5/6 Access Allowed
12:39:53 p.m. No Response
12:39:53 p.m. No Response
12:39:54 p.m. No Response
12:39:54 p.m. No Response
12:39:54 p.m. No Response
12:39:55 p.m. No Response
12:39:55 p.m. No Response
12:39:56 p.m. No Response
12:39:56 p.m. Requesting The Type Of Flash Memory In Use
12:39:57 p.m. No Response
12:39:57 p.m. No Response
12:39:57 p.m. No Response
12:39:58 p.m. No Response
12:39:58 p.m. No Response
12:39:59 p.m. No Response
12:39:59 p.m. Found AMD 29F010 Flash Memory
12:39:59 p.m. Sector Protection: Sector 0=0, Sector 1=0, Sector 2=0, Sector 3=0, Sector 4=0, Sector 5=0, Sector 6=0, Sector 7=0
12:39:59 p.m. Starting Bin Dumper...
12:39:59 p.m. Using Uploaded Bin Dumper Routines
12:39:59 p.m. Requesting 64 Bytes From Address $0
12:39:59 p.m. No Response, Re-Sending The Request
12:39:59 p.m. Requesting 64 Bytes From Address $0
12:39:59 p.m. No Response, Re-Sending The Request
12:39:59 p.m. Requesting 64 Bytes From Address $0
12:40:00 p.m. No Response, Re-Sending The Request
12:40:00 p.m. Requesting 64 Bytes From Address $0
12:40:00 p.m. No Response, Re-Sending The Request
12:40:00 p.m. Requesting 64 Bytes From Address $0
12:40:00 p.m. No Response, Re-Sending The Request
12:40:00 p.m. Requesting 64 Bytes From Address $0
12:40:01 p.m. No Response, Re-Sending The Request
12:40:01 p.m. Requesting 64 Bytes From Address $0
12:40:01 p.m. No Response, Re-Sending The Request
12:40:01 p.m. Requesting 64 Bytes From Address $0
12:40:01 p.m. No Response, Re-Sending The Request
12:40:01 p.m. Requesting 64 Bytes From Address $0
12:40:02 p.m. No Response, Re-Sending The Request
12:40:02 p.m. Requesting 64 Bytes From Address $0
12:40:02 p.m. No Response, Re-Sending The Request
12:40:02 p.m. Requesting 64 Bytes From Address $0
12:40:02 p.m. No Response, Re-Sending The Request
12:40:02 p.m. Too Many ReSends, Aborted Task
12:40:02 p.m. COM10 closed
12:40:02 p.m. Clean Up The PCM
12:40:03 p.m. No Response
12:40:03 p.m. No Response
12:40:03 p.m. No Response
12:40:03 p.m. Frame Error
12:40:03 p.m. Frame Error
12:40:03 p.m. Frame Error
12:40:04 p.m. Frame Error
12:40:04 p.m. Frame Error
12:40:04 p.m. Frame Error
12:40:04 p.m. Frame Error
12:40:04 p.m. Waiting For 15ms Of Silence With 300ms Timeout
12:40:04 p.m. Silence Detected
12:40:04 p.m. Requesting Chatter To Be Enabled For Device F7
12:40:04 p.m. Chatter Enabled
12:40:04 p.m. Waiting For 15ms Of Silence With 300ms Timeout
12:40:04 p.m. Silence Detected
12:40:04 p.m. Requesting Chatter To Be Enabled For Device F1
12:40:04 p.m. Chatter Enabled
12:40:09 p.m. Binary Read Fail
It actually got to reqeusting data but that didnt happen.
when i plugged in my cable it re downloaded the mouse driver, i manually went and unistalled that driver as it was sharing the same com port as the cable. thats when i got it to almost reqeust data.
how the hell do i keep this from trying to download the drivers for microsoft serial mouse. i uninstall and it comes back
i think this could be half my issue
Re: Vx v6 not getting bin
disable it, not uninstall it.
Re: Vx v6 not getting bin
Give a go a what "The1" says. Since he knows his devices inside and out
If that fails, the following is what I always do..
Uninstall the driver from device manager, then unplug the cable.
Download and install the latest FTDI driver from the website: http://www.ftdichip.com/Drivers/CDM/CDM21218_Setup.zip
Make sure you are not connected to the car, and then plug in the ALDL Cable.
The cable appears as a mouse when its connected the the vehicle and then the laptop while trying to install. The above always fixes the problem
Honestly.. I would think about trying to setup a bench harness if the above doesnt work.
When it failed the first time, I can see you tried again about 50seconds later and received the error:
12:38:25 p.m. COM10 Closed
12:39:11 p.m. Unable To Open Com Port
Unable to open comport.. generally suggest a conflict occurring on the comport.
If that fails, the following is what I always do..
Uninstall the driver from device manager, then unplug the cable.
Download and install the latest FTDI driver from the website: http://www.ftdichip.com/Drivers/CDM/CDM21218_Setup.zip
Make sure you are not connected to the car, and then plug in the ALDL Cable.
The cable appears as a mouse when its connected the the vehicle and then the laptop while trying to install. The above always fixes the problem
Honestly.. I would think about trying to setup a bench harness if the above doesnt work.
When it failed the first time, I can see you tried again about 50seconds later and received the error:
12:38:25 p.m. COM10 Closed
12:39:11 p.m. Unable To Open Com Port
Unable to open comport.. generally suggest a conflict occurring on the comport.
Your Local Aussie Reverse Engineer
Contact for Software/Hardware development and Reverse Engineering
Site:https://www.envyouscustoms.com
Mob:+61406 140 726
Contact for Software/Hardware development and Reverse Engineering
Site:https://www.envyouscustoms.com
Mob:+61406 140 726
Re: Vx v6 not getting bin
I've done a few flash PCM's but only on the bench never done one in a car yet. Always worked for me.
Re: Vx v6 not getting bin
well i rarely have internet to update drivers when im out doing flash pcm's only ever had the issue in a car not on the bench, it's like something trips the device out, perhaps ground being noisy?