odb2 not working with tp5 and tech2

160 And 8192 Baud Aldl
lux82
Posts: 23
Joined: Sat Nov 21, 2015 3:05 pm

odb2 not working with tp5 and tech2

Post by lux82 »

hi all iv done a vx l67 4l60e auto conversion on my 82 hilux 4wd. i can't get my tech 2 or tp5 to communicate with computer. im using a marks4wd loom with obd2 plug. iv checked all wires they are good. its got no bcm and vats off on memcal
User avatar
The1
Posts: 4694
Joined: Mon Jan 04, 2010 10:23 am

Re: odb2 not working with tp5 and tech2

Post by The1 »

tunerpro should talk, though you may need to turn of BCM silence in the ADX. See link below. Tech2 will prob be useless as it'l want to check every module before hand.

viewtopic.php?f=27&t=2518&start=580#p71623
lux82
Posts: 23
Joined: Sat Nov 21, 2015 3:05 pm

Re: odb2 not working with tp5 and tech2

Post by lux82 »

what command is bcm silence as iv tried all commands
lux82
Posts: 23
Joined: Sat Nov 21, 2015 3:05 pm

Re: odb2 not working with tp5 and tech2

Post by lux82 »

got it connected with tp5 but doesn't show data and stays at 11.29hz
User avatar
Tazzi
Posts: 3422
Joined: Thu May 17, 2012 8:53 pm
cars: VE SS Ute
Location: WA
Contact:

Re: odb2 not working with tp5 and tech2

Post by Tazzi »

lux82 wrote:got it connected with tp5 but doesn't show data and stays at 11.29hz
11.29Hz means its recording live data.

Have you opened up the dash display?
Your Local Aussie Reverse Engineer
Contact for Software/Hardware development and Reverse Engineering
Site:https://www.envyouscustoms.com
Mob:+61406 140 726
Image
User avatar
antus
Site Admin
Posts: 8237
Joined: Sat Feb 28, 2009 8:34 pm
cars: TX Gemini 2L Twincam
TX Gemini SR20 18psi
Datsun 1200 Ute
Subaru Blitzen '06 EZ30 4th gen, 3.0R Spec B
Contact:

Re: odb2 not working with tp5 and tech2

Post by antus »

This doesnt change where you are at and is more for people landing on this thread from elsewhere but its worth noting that the OBD2 style connector is carrying ALDL data, with the exception of LS1 where its carrying VPW and ALDL.
Have you read the FAQ? For lots of information and links to significant threads see here: http://pcmhacking.net/forums/viewtopic.php?f=7&t=1396
lux82
Posts: 23
Joined: Sat Nov 21, 2015 3:05 pm

Re: odb2 not working with tp5 and tech2

Post by lux82 »

it doesn't show any live data on dash display
User avatar
The1
Posts: 4694
Joined: Mon Jan 04, 2010 10:23 am

Re: odb2 not working with tp5 and tech2

Post by The1 »

What adx are you using? What code are you using, I assume you've had it modded for vats off
lux82
Posts: 23
Joined: Sat Nov 21, 2015 3:05 pm

Re: odb2 not working with tp5 and tech2

Post by lux82 »

VX_V6_SC_$A5K_Enhanced_v1.3c adx. memcal was done by mace engineering with vats turned off.
User avatar
antus
Site Admin
Posts: 8237
Joined: Sat Feb 28, 2009 8:34 pm
cars: TX Gemini 2L Twincam
TX Gemini SR20 18psi
Datsun 1200 Ute
Subaru Blitzen '06 EZ30 4th gen, 3.0R Spec B
Contact:

Re: odb2 not working with tp5 and tech2

Post by antus »

What interface? Is it one of ours?
Have you read the FAQ? For lots of information and links to significant threads see here: http://pcmhacking.net/forums/viewtopic.php?f=7&t=1396
Post Reply