odb2 not working with tp5 and tech2
odb2 not working with tp5 and tech2
hi all iv done a vx l67 4l60e auto conversion on my 82 hilux 4wd. i can't get my tech 2 or tp5 to communicate with computer. im using a marks4wd loom with obd2 plug. iv checked all wires they are good. its got no bcm and vats off on memcal
Re: odb2 not working with tp5 and tech2
tunerpro should talk, though you may need to turn of BCM silence in the ADX. See link below. Tech2 will prob be useless as it'l want to check every module before hand.
viewtopic.php?f=27&t=2518&start=580#p71623
viewtopic.php?f=27&t=2518&start=580#p71623
Re: odb2 not working with tp5 and tech2
what command is bcm silence as iv tried all commands
Re: odb2 not working with tp5 and tech2
got it connected with tp5 but doesn't show data and stays at 11.29hz
Re: odb2 not working with tp5 and tech2
11.29Hz means its recording live data.lux82 wrote:got it connected with tp5 but doesn't show data and stays at 11.29hz
Have you opened up the dash display?
Your Local Aussie Reverse Engineer
Contact for Software/Hardware development and Reverse Engineering
Site:https://www.envyouscustoms.com
Mob:+61406 140 726
Contact for Software/Hardware development and Reverse Engineering
Site:https://www.envyouscustoms.com
Mob:+61406 140 726
- antus
- Site Admin
- Posts: 8239
- Joined: Sat Feb 28, 2009 8:34 pm
- cars: TX Gemini 2L Twincam
TX Gemini SR20 18psi
Datsun 1200 Ute
Subaru Blitzen '06 EZ30 4th gen, 3.0R Spec B - Contact:
Re: odb2 not working with tp5 and tech2
This doesnt change where you are at and is more for people landing on this thread from elsewhere but its worth noting that the OBD2 style connector is carrying ALDL data, with the exception of LS1 where its carrying VPW and ALDL.
Have you read the FAQ? For lots of information and links to significant threads see here: http://pcmhacking.net/forums/viewtopic.php?f=7&t=1396
Re: odb2 not working with tp5 and tech2
it doesn't show any live data on dash display
Re: odb2 not working with tp5 and tech2
What adx are you using? What code are you using, I assume you've had it modded for vats off
Re: odb2 not working with tp5 and tech2
VX_V6_SC_$A5K_Enhanced_v1.3c adx. memcal was done by mace engineering with vats turned off.
- antus
- Site Admin
- Posts: 8239
- Joined: Sat Feb 28, 2009 8:34 pm
- cars: TX Gemini 2L Twincam
TX Gemini SR20 18psi
Datsun 1200 Ute
Subaru Blitzen '06 EZ30 4th gen, 3.0R Spec B - Contact:
Re: odb2 not working with tp5 and tech2
What interface? Is it one of ours?
Have you read the FAQ? For lots of information and links to significant threads see here: http://pcmhacking.net/forums/viewtopic.php?f=7&t=1396