I was wondering about the pcv valve. That's a LIM off job to inspect on the ecotec I gather ? Or is there another option there ?immortality wrote:EGR or PCV valve?
From personal experience, a bad PCV valve will allow the intake to suck up a heap of oil although I've never lost that much oil in such a short period.
Xdl for VY V6 - what do you see ?
-
- Posts: 288
- Joined: Wed Jul 01, 2009 7:18 pm
- cars: VY V6 Commodore ute.
VS V6 Commo sedan.
VT V6 powered 4x4 Hilux ute.
Re: Xdl for VY V6 - what do you see ?
-
- Posts: 3426
- Joined: Thu Apr 09, 2009 12:31 pm
- cars: VH, VN, VS, VX
Re: Xdl for VY V6 - what do you see ?
You have to separate the plenum from the LIM. Pop the plenum cover off and see if there is a trail of oil from the PCV breather port in front of the TB neck going into the runners.
- madmaxisback
- Posts: 145
- Joined: Mon Nov 09, 2009 4:56 pm
- cars: VN Calais
VK Berlina - Location: Perth
Re: Xdl for VY V6 - what do you see ?
LIM gaskets will normally have gunk under rad cap or in/on coolant reservoir dipstick. Oil in water can occur too. Every Ecotec I have owned has had these gaskets fail around 180-250k. Yes more money!
http://forums.whirlpool.net.au/archive/2195476
Grab the gaskets on sale:
https://www.maceengineering.com.au/epag ... cts/GSK601
Best guide:
https://forums.justcommodores.com.au/th ... cs.187621/
PIA job but well worth it as if weeping it can wreck O2s, plugs etc in weeks and generally make the motors run like dogs.
I would grab some matched injectors off The1 while I was doing the gaskets if they haven't been done yet, as old ones can dribble at idle and make them run like crap too.
http://forums.whirlpool.net.au/archive/2195476
Grab the gaskets on sale:
https://www.maceengineering.com.au/epag ... cts/GSK601
Best guide:
https://forums.justcommodores.com.au/th ... cs.187621/
PIA job but well worth it as if weeping it can wreck O2s, plugs etc in weeks and generally make the motors run like dogs.
I would grab some matched injectors off The1 while I was doing the gaskets if they haven't been done yet, as old ones can dribble at idle and make them run like crap too.
-
- Posts: 288
- Joined: Wed Jul 01, 2009 7:18 pm
- cars: VY V6 Commodore ute.
VS V6 Commo sedan.
VT V6 powered 4x4 Hilux ute.
Re: Xdl for VY V6 - what do you see ?
Thanks I will look into those Injectors from The1.madmaxisback wrote:LIM gaskets will normally have gunk under rad cap or in/on coolant reservoir dipstick. Oil in water can occur too. Every Ecotec I have owned has had these gaskets fail around 180-250k. Yes more money!
http://forums.whirlpool.net.au/archive/2195476
Grab the gaskets on sale:
https://www.maceengineering.com.au/epag ... cts/GSK601
Best guide:
https://forums.justcommodores.com.au/th ... cs.187621/
PIA job but well worth it as if weeping it can wreck O2s, plugs etc in weeks and generally make the motors run like dogs.
I would grab some matched injectors off The1 while I was doing the gaskets if they haven't been done yet, as old ones can dribble at idle and make them run like crap too.
Saw a thread on here before showing some improved spray patterns from a compatible injector he had found.