Help with my Vs ute

160 And 8192 Baud Aldl
User avatar
InspectorCabbage
Posts: 21
Joined: Sun May 20, 2018 12:33 pm
cars: Holden Commodore 96 Ute L67 Getrag
Holden Statesman 97 Ecotec
Holden Commodore 95 VR ute 5lt auto
Location: Bacchus Marsh Vic

Help with my Vs ute

Post by InspectorCabbage »

Hey just logged how my car is running, anyone here able to help and find any issues
l67 with a getrag, using the mace memcal, have a cai and 1.9 ratio rockers, and a bored sc outport thing
Attachments
Andrews VS l67 getrag.xdl
(142.64 KiB) Downloaded 339 times
Comcal76
Posts: 182
Joined: Mon Feb 26, 2018 4:18 pm
Location: Tasmania

Re: Help with my Vs ute

Post by Comcal76 »

what ADX did you use mate.
Comcal76
Posts: 182
Joined: Mon Feb 26, 2018 4:18 pm
Location: Tasmania

Re: Help with my Vs ute

Post by Comcal76 »

you have fault codes set, codes are 23, 32, 46, 76.

https://forums.justcommodores.com.au/th ... st.179140/
User avatar
InspectorCabbage
Posts: 21
Joined: Sun May 20, 2018 12:33 pm
cars: Holden Commodore 96 Ute L67 Getrag
Holden Statesman 97 Ecotec
Holden Commodore 95 VR ute 5lt auto
Location: Bacchus Marsh Vic

Re: Help with my Vs ute

Post by InspectorCabbage »

hey i am ill attach the one i was using

how did you see fault codes?
ill have a look at what they are
Attachments
VS_V6_SC_$51_Enhanced_v1.0e.adx
(154.71 KiB) Downloaded 316 times
User avatar
InspectorCabbage
Posts: 21
Joined: Sun May 20, 2018 12:33 pm
cars: Holden Commodore 96 Ute L67 Getrag
Holden Statesman 97 Ecotec
Holden Commodore 95 VR ute 5lt auto
Location: Bacchus Marsh Vic

Re: Help with my Vs ute

Post by InspectorCabbage »

Here are two more logs from me driving to and from the gym, i tried to drive nicely and abit with my foot down
Attachments
Andrews VS l67 getrag drive 2.xdl
(348.96 KiB) Downloaded 326 times
Andrews VS l67 getrag drive.xdl
(288.89 KiB) Downloaded 336 times
Comcal76
Posts: 182
Joined: Mon Feb 26, 2018 4:18 pm
Location: Tasmania

Re: Help with my Vs ute

Post by Comcal76 »

Hope this helps.
Click on show data list view
Click on show data list view
Click on Message 0 Engine Data Only and select DTC Error Codes
Click on Message 0 Engine Data Only and select DTC Error Codes
Now you should see the set fault codes
Now you should see the set fault codes
Now go to view and do this
Now go to view and do this
This should be showing now click on and select Clear DTC PCM
This should be showing now click on and select Clear DTC PCM
Now highlight the set fault and press on the send button the fault should now say Clear
Now highlight the set fault and press on the send button the fault should now say Clear
User avatar
InspectorCabbage
Posts: 21
Joined: Sun May 20, 2018 12:33 pm
cars: Holden Commodore 96 Ute L67 Getrag
Holden Statesman 97 Ecotec
Holden Commodore 95 VR ute 5lt auto
Location: Bacchus Marsh Vic

Re: Help with my Vs ute

Post by InspectorCabbage »

[quote="Comcal76"]Hope this helps.

thanks so much ill have a look, and once i clear them, should i reset and see if there reappear? and if they do does that mean there a faulty sensor?

once again thank you!
User avatar
InspectorCabbage
Posts: 21
Joined: Sun May 20, 2018 12:33 pm
cars: Holden Commodore 96 Ute L67 Getrag
Holden Statesman 97 Ecotec
Holden Commodore 95 VR ute 5lt auto
Location: Bacchus Marsh Vic

Re: Help with my Vs ute

Post by InspectorCabbage »

Here is after i cleared the faults
Attachments
Andrews VS l67 getrag out of gear after fault clearing.xdl
(41.39 KiB) Downloaded 332 times
Comcal76
Posts: 182
Joined: Mon Feb 26, 2018 4:18 pm
Location: Tasmania

Re: Help with my Vs ute

Post by Comcal76 »

If the fault codes return it could be the part or wiring.

I noticed in the log that the left bank fuel trims seem to add a lot more fuel, could try cleaning your maf with electrical contact cleaner.

For the idle bouncing around the way it does try cleaning the throttle body and iac valve with carby cleaner but don't spray in the electrics.

May I suggest using these plug's NGK bpr6ef 13 and leave them at 1.3mm gap, I've tried plenty of other brands and had issues ended up putting the NGK's back in and no more issue's.
User avatar
InspectorCabbage
Posts: 21
Joined: Sun May 20, 2018 12:33 pm
cars: Holden Commodore 96 Ute L67 Getrag
Holden Statesman 97 Ecotec
Holden Commodore 95 VR ute 5lt auto
Location: Bacchus Marsh Vic

Re: Help with my Vs ute

Post by InspectorCabbage »

Comcal76 wrote:If the fault codes return it could be the part or wiring.

I noticed in the log that the left bank fuel trims seem to add a lot more fuel, could try cleaning your maf with electrical contact cleaner.

For the idle bouncing around the way it does try cleaning the throttle body and iac valve with carby cleaner but don't spray in the electrics.

May I suggest using these plug's NGK bpr6ef 13 and leave them at 1.3mm gap, I've tried plenty of other brands and had issues ended up putting the NGK's back in and no more issue's.
My maf is cleaned as i swapped it when i was having issues, ill try putting back another vs maf (making sure its clean aswell

will do tomorrow ill clean them both :)

ill order some of them tonight
Post Reply