Help with my Vs ute
- InspectorCabbage
- Posts: 21
- Joined: Sun May 20, 2018 12:33 pm
- cars: Holden Commodore 96 Ute L67 Getrag
Holden Statesman 97 Ecotec
Holden Commodore 95 VR ute 5lt auto - Location: Bacchus Marsh Vic
Help with my Vs ute
Hey just logged how my car is running, anyone here able to help and find any issues
l67 with a getrag, using the mace memcal, have a cai and 1.9 ratio rockers, and a bored sc outport thing
l67 with a getrag, using the mace memcal, have a cai and 1.9 ratio rockers, and a bored sc outport thing
- Attachments
-
- Andrews VS l67 getrag.xdl
- (142.64 KiB) Downloaded 339 times
Re: Help with my Vs ute
what ADX did you use mate.
Re: Help with my Vs ute
you have fault codes set, codes are 23, 32, 46, 76.
https://forums.justcommodores.com.au/th ... st.179140/
https://forums.justcommodores.com.au/th ... st.179140/
- InspectorCabbage
- Posts: 21
- Joined: Sun May 20, 2018 12:33 pm
- cars: Holden Commodore 96 Ute L67 Getrag
Holden Statesman 97 Ecotec
Holden Commodore 95 VR ute 5lt auto - Location: Bacchus Marsh Vic
Re: Help with my Vs ute
hey i am ill attach the one i was using
how did you see fault codes?
ill have a look at what they are
how did you see fault codes?
ill have a look at what they are
- Attachments
-
- VS_V6_SC_$51_Enhanced_v1.0e.adx
- (154.71 KiB) Downloaded 316 times
- InspectorCabbage
- Posts: 21
- Joined: Sun May 20, 2018 12:33 pm
- cars: Holden Commodore 96 Ute L67 Getrag
Holden Statesman 97 Ecotec
Holden Commodore 95 VR ute 5lt auto - Location: Bacchus Marsh Vic
Re: Help with my Vs ute
Here are two more logs from me driving to and from the gym, i tried to drive nicely and abit with my foot down
- Attachments
-
- Andrews VS l67 getrag drive 2.xdl
- (348.96 KiB) Downloaded 326 times
-
- Andrews VS l67 getrag drive.xdl
- (288.89 KiB) Downloaded 336 times
Re: Help with my Vs ute
Hope this helps.
- InspectorCabbage
- Posts: 21
- Joined: Sun May 20, 2018 12:33 pm
- cars: Holden Commodore 96 Ute L67 Getrag
Holden Statesman 97 Ecotec
Holden Commodore 95 VR ute 5lt auto - Location: Bacchus Marsh Vic
Re: Help with my Vs ute
[quote="Comcal76"]Hope this helps.
thanks so much ill have a look, and once i clear them, should i reset and see if there reappear? and if they do does that mean there a faulty sensor?
once again thank you!
thanks so much ill have a look, and once i clear them, should i reset and see if there reappear? and if they do does that mean there a faulty sensor?
once again thank you!
- InspectorCabbage
- Posts: 21
- Joined: Sun May 20, 2018 12:33 pm
- cars: Holden Commodore 96 Ute L67 Getrag
Holden Statesman 97 Ecotec
Holden Commodore 95 VR ute 5lt auto - Location: Bacchus Marsh Vic
Re: Help with my Vs ute
Here is after i cleared the faults
- Attachments
-
- Andrews VS l67 getrag out of gear after fault clearing.xdl
- (41.39 KiB) Downloaded 332 times
Re: Help with my Vs ute
If the fault codes return it could be the part or wiring.
I noticed in the log that the left bank fuel trims seem to add a lot more fuel, could try cleaning your maf with electrical contact cleaner.
For the idle bouncing around the way it does try cleaning the throttle body and iac valve with carby cleaner but don't spray in the electrics.
May I suggest using these plug's NGK bpr6ef 13 and leave them at 1.3mm gap, I've tried plenty of other brands and had issues ended up putting the NGK's back in and no more issue's.
I noticed in the log that the left bank fuel trims seem to add a lot more fuel, could try cleaning your maf with electrical contact cleaner.
For the idle bouncing around the way it does try cleaning the throttle body and iac valve with carby cleaner but don't spray in the electrics.
May I suggest using these plug's NGK bpr6ef 13 and leave them at 1.3mm gap, I've tried plenty of other brands and had issues ended up putting the NGK's back in and no more issue's.
- InspectorCabbage
- Posts: 21
- Joined: Sun May 20, 2018 12:33 pm
- cars: Holden Commodore 96 Ute L67 Getrag
Holden Statesman 97 Ecotec
Holden Commodore 95 VR ute 5lt auto - Location: Bacchus Marsh Vic
Re: Help with my Vs ute
My maf is cleaned as i swapped it when i was having issues, ill try putting back another vs maf (making sure its clean aswellComcal76 wrote:If the fault codes return it could be the part or wiring.
I noticed in the log that the left bank fuel trims seem to add a lot more fuel, could try cleaning your maf with electrical contact cleaner.
For the idle bouncing around the way it does try cleaning the throttle body and iac valve with carby cleaner but don't spray in the electrics.
May I suggest using these plug's NGK bpr6ef 13 and leave them at 1.3mm gap, I've tried plenty of other brands and had issues ended up putting the NGK's back in and no more issue's.
will do tomorrow ill clean them both
ill order some of them tonight