I have created plugin for Tunerpro RT:
https://github.com/joukoy/Tunerpo-aldl-wb-plugin
Alternate method to get wideband data without modifying bin: connect WB with serial port.
Currently supports:
- 8192 baud ALDL
- Innovate LM-1 protocol (tested with MTX-L)
- Aem Uego (tested with X-series 30-0300)
Tunerpro RT + ALDL + WB
Re: Tunerpro RT + ALDL + WB
Added support for Plx WB, but not tested.
I hope someone can test & report.
I hope someone can test & report.
- delcowizzid
- Posts: 5493
- Joined: Sat Feb 28, 2009 8:38 pm
- Location: Wellington NZ
- Contact:
Re: Tunerpro RT + ALDL + WB
What a great idea thanks for your contribution
If Its Got Gas Or Ass Count Me In.if it cant be fixed with a hammer you have an electrical problem
Re: Tunerpro RT + ALDL + WB
I don't have car with ALDL, so I created "virtual ecm" for testing my plugin.
https://github.com/joukoy/AldlEmulator
Far from complete, but makes Tunerpro RT happy with original acq plugin, and with my new plugin.
Compatible with $6E mask, easy to modify for other masks by setting correct byte offsets.
Use with real comports and null-modem cables, or with "Virtual serial port Driver"
https://github.com/joukoy/AldlEmulator
Far from complete, but makes Tunerpro RT happy with original acq plugin, and with my new plugin.
Compatible with $6E mask, easy to modify for other masks by setting correct byte offsets.
Use with real comports and null-modem cables, or with "Virtual serial port Driver"
- Attachments
-
- aldlemulator-v0.3.JPG (27.31 KiB) Viewed 3657 times
- Holden202T
- Posts: 10311
- Joined: Sat Feb 28, 2009 9:05 pm
- Location: Tenambit, NSW
- Contact:
Re: Tunerpro RT + ALDL + WB
very cool!
No matter what the question is, the answer is always more horsepower!
Just starting out? Have a read of the getting started guide
Basic tuning of a delco ECM with $12P thread
Advanced tuning of a delco ECM with $12P thread
Just starting out? Have a read of the getting started guide
Basic tuning of a delco ECM with $12P thread
Advanced tuning of a delco ECM with $12P thread