Capturing Tech1 Commands VS V6
Re: Capturing Tech1 Commands VS V6
ive updated the efilive xml again about with more stuff.
Re: Capturing Tech1 Commands VS V6
Lilbug was Motorola's monitor programme, orginally designed for use on the 6801 processor. The Tech1 uses the 6803, the 'big brother' of the 6801. I would be very interested in the binary for this.brett_jjj wrote:I If anyone is interested in any of this stuff, I can send you the bin files ,so you can check them out.When I open the LILBUG bin file it shows menus that display cartridge boot files,display memory addresses,offsets,it mentions learn dir,enable/disable update,memory examine/change,and heaps more.I think it would be very interesting to see exactly what it does ,so hopefully I can (or can find someone) to work out the cartridge bin files and to work out exactly what this LILBUG thing does.Hopefully it might help in finding the stuff you guys are wanting to know about the communications between the vehicle and the tech1.cheers.
http://bitsavers.org/pdf/motorola/MC680 ... _Aug80.pdf
Re: Capturing Tech1 Commands VS V6
I know this is quite the old but.. hey.. why not go thread grave digging!
Got a tech1 on the way (Hopefully it works!), and want to pickup on this. These things are getting beyond rare to find now, let alone working ones so its about time its 100% reverse engineered.
Looking to provide a bit by bit breakdown of the major systems which will be publicly available:
- Engine (I know VL400 has that down pack already , just want to run over Freeze data pretty much )
- BCM
- ABS
- SRS
Im *hoping* this will make the tech1 completely redundant after that. I had a client call up saying holden wanted $300 to plug in their tech1. Like f*ck me.. is that serious!
Im pretty hopeless with making up a tunerpro definition file, so hopefully someone can help put that together as I break down each ALDL frame?
Next, the ALDL pin for the SRS in VR and VS is on a different pin, pin1 if Im not mistake, so a quick adapter needs to be made to be able to communicate to that system. Iv just made up a couple male<->Female adapters for a plug and play swap over so that the ALDL cable doesnt actually have to be modified.
Got a tech1 on the way (Hopefully it works!), and want to pickup on this. These things are getting beyond rare to find now, let alone working ones so its about time its 100% reverse engineered.
Looking to provide a bit by bit breakdown of the major systems which will be publicly available:
- Engine (I know VL400 has that down pack already , just want to run over Freeze data pretty much )
- BCM
- ABS
- SRS
Im *hoping* this will make the tech1 completely redundant after that. I had a client call up saying holden wanted $300 to plug in their tech1. Like f*ck me.. is that serious!
Im pretty hopeless with making up a tunerpro definition file, so hopefully someone can help put that together as I break down each ALDL frame?
Next, the ALDL pin for the SRS in VR and VS is on a different pin, pin1 if Im not mistake, so a quick adapter needs to be made to be able to communicate to that system. Iv just made up a couple male<->Female adapters for a plug and play swap over so that the ALDL cable doesnt actually have to be modified.
Your Local Aussie Reverse Engineer
Contact for Software/Hardware development and Reverse Engineering
Site:https://www.envyouscustoms.com
Mob:+61406 140 726
Contact for Software/Hardware development and Reverse Engineering
Site:https://www.envyouscustoms.com
Mob:+61406 140 726
Re: Capturing Tech1 Commands VS V6
Tech1 kits arrived! Lights up which is a start!
Surprised the damn thing didnt get wrecked, the (useless) seller just threw in in a shitty squashed box, unwrapped, with the rest of the parts to bang around! You'd think they would try take car of something that someone just paid hundreds for... ffs
Iv sent stuff, wrapped to the brim in bubble wrap looking like the michelen man in double wall boxes which have ended up smashed.. how on earth this wasnt obliterated is beyond me!
Right.. so.. the cards I have:
- Open/Vauxhall 91-92 ECU GB
- Opel/Vauxhall 87-94 ECU GB
- Opel/Vauxhall 87-95 ECU GB
- Opel/Vauxhall 87-95 ECU GB (Double up??)
- Isuzu 90-92 ELEC 4-speed AT
- Holden's 1988 ECM (VL,VN, Astra ect)
- VS T4 SYSTEMS - OEM DEALER
Looks like I have a spare to try muck with/re-write. Will fire up the VS one later to see what that holds
Surprised the damn thing didnt get wrecked, the (useless) seller just threw in in a shitty squashed box, unwrapped, with the rest of the parts to bang around! You'd think they would try take car of something that someone just paid hundreds for... ffs
Iv sent stuff, wrapped to the brim in bubble wrap looking like the michelen man in double wall boxes which have ended up smashed.. how on earth this wasnt obliterated is beyond me!
Right.. so.. the cards I have:
- Open/Vauxhall 91-92 ECU GB
- Opel/Vauxhall 87-94 ECU GB
- Opel/Vauxhall 87-95 ECU GB
- Opel/Vauxhall 87-95 ECU GB (Double up??)
- Isuzu 90-92 ELEC 4-speed AT
- Holden's 1988 ECM (VL,VN, Astra ect)
- VS T4 SYSTEMS - OEM DEALER
Looks like I have a spare to try muck with/re-write. Will fire up the VS one later to see what that holds
Your Local Aussie Reverse Engineer
Contact for Software/Hardware development and Reverse Engineering
Site:https://www.envyouscustoms.com
Mob:+61406 140 726
Contact for Software/Hardware development and Reverse Engineering
Site:https://www.envyouscustoms.com
Mob:+61406 140 726
Re: Capturing Tech1 Commands VS V6
Feeling a bit less paranoid about it being damaged now
Trying to compile the info The1 and other put into this thread previously so I can emulate data back. Hopefully will be able to get some proper R&D started shortly.
Trying to compile the info The1 and other put into this thread previously so I can emulate data back. Hopefully will be able to get some proper R&D started shortly.
Your Local Aussie Reverse Engineer
Contact for Software/Hardware development and Reverse Engineering
Site:https://www.envyouscustoms.com
Mob:+61406 140 726
Contact for Software/Hardware development and Reverse Engineering
Site:https://www.envyouscustoms.com
Mob:+61406 140 726
Re: Capturing Tech1 Commands VS V6
Any chance of the bcm stuff being added in for the vq and vp Calais for bcm at some stage to your programs for key programming?
Re: Capturing Tech1 Commands VS V6
Thought about the VN/VQ/VP stuff, but if Im not mistaken they all use 12v signal... plus speak extreeeeeemely slowly at 160baud (Instead of our normal ALDL speed).Dazza92VP wrote:Any chance of the bcm stuff being added in for the vq and vp Calais for bcm at some stage to your programs for key programming?
Ill see what happens though, the new cable design Iv been working on technically will take the 12v, guess Ill see if I can get any legible info from the tech1?
Your Local Aussie Reverse Engineer
Contact for Software/Hardware development and Reverse Engineering
Site:https://www.envyouscustoms.com
Mob:+61406 140 726
Contact for Software/Hardware development and Reverse Engineering
Site:https://www.envyouscustoms.com
Mob:+61406 140 726
Re: Capturing Tech1 Commands VS V6
Be good if you could include the bcm stuff for them as there is barely anyone with the ability to program these or connect up to these old girls and if you do find someone with the tech 1 bcm cartridge they want your first born right arm and both nuts
Re: Capturing Tech1 Commands VS V6
i havn't collected any yet, not even a gold mineDazza92VP wrote:Be good if you could include the bcm stuff for them as there is barely anyone with the ability to program these or connect up to these old girls and if you do find someone with the tech 1 bcm cartridge they want your first born right arm and both nuts
Re: Capturing Tech1 Commands VS V6
I get a couple requests daily. Alot of people have the older vehicles. Will be posting it all up when its loggedThe1 wrote:i havn't collected any yet, not even a gold mineDazza92VP wrote:Be good if you could include the bcm stuff for them as there is barely anyone with the ability to program these or connect up to these old girls and if you do find someone with the tech 1 bcm cartridge they want your first born right arm and both nuts
Your Local Aussie Reverse Engineer
Contact for Software/Hardware development and Reverse Engineering
Site:https://www.envyouscustoms.com
Mob:+61406 140 726
Contact for Software/Hardware development and Reverse Engineering
Site:https://www.envyouscustoms.com
Mob:+61406 140 726