VS v6 sensor data. No iac? Photos below
-
- Posts: 246
- Joined: Mon Aug 19, 2019 12:32 pm
- cars: 1994 VR v6 berlina
1996 VS v6 executive - Location: Christchurch, NZ
VS v6 sensor data. No iac? Photos below
Hi
Plugged into the VS v6 just before, took some photos and this is what I got.
Looking to check iac steps also, but I didn't lay eyes on it in the data listing.
Is there any thing wrong with any data?
Cheers
Pete
Plugged into the VS v6 just before, took some photos and this is what I got.
Looking to check iac steps also, but I didn't lay eyes on it in the data listing.
Is there any thing wrong with any data?
Cheers
Pete
Re: VS v6 sensor data. No iac? Photos below
Scroll down to the bottom of your Data List View page.
If it's not there, you can add it in.
Select Acquisition at the top of TunerPro screen. Scroll down to and select Edit Definition.
Click + Item List Views, select Message 0 - Engine Data Only. Then select Insert Items in the adjacent box.
Scroll down and select IAC Steps.
Click OK then Save.
You can also remove items from the list if not required by highlighting the list item then clicking Delete Items ->
If it's not there, you can add it in.
Select Acquisition at the top of TunerPro screen. Scroll down to and select Edit Definition.
Click + Item List Views, select Message 0 - Engine Data Only. Then select Insert Items in the adjacent box.
Scroll down and select IAC Steps.
Click OK then Save.
You can also remove items from the list if not required by highlighting the list item then clicking Delete Items ->
-
- Posts: 246
- Joined: Mon Aug 19, 2019 12:32 pm
- cars: 1994 VR v6 berlina
1996 VS v6 executive - Location: Christchurch, NZ
Re: VS v6 sensor data. No iac? Photos below
Hi quipt4it, cheers for your reply.
Just added a few on my end.
Is there a way to have the analog gauges as well?
Cheers
Pete
Just added a few on my end.
Is there a way to have the analog gauges as well?
Cheers
Pete
Re: VS v6 sensor data. No iac? Photos below
Try this:
Then select Engine Dash from the drop-down menu-
- Posts: 246
- Joined: Mon Aug 19, 2019 12:32 pm
- cars: 1994 VR v6 berlina
1996 VS v6 executive - Location: Christchurch, NZ
Re: VS v6 sensor data. No iac? Photos below
I had tried clicking on that icon before asking about the gauges. But no gauges appear.
Re: VS v6 sensor data. No iac? Photos below
Does the Data History Table or the Data Monitors display.
If it's illuminated ie not 'greyed out' it should work.
If it's illuminated ie not 'greyed out' it should work.
Re: VS v6 sensor data. No iac? Photos below
Select Acquisition in the TunerPro header.
Try and select via the drop-down menu.
Try and select via the drop-down menu.
-
- Posts: 246
- Joined: Mon Aug 19, 2019 12:32 pm
- cars: 1994 VR v6 berlina
1996 VS v6 executive - Location: Christchurch, NZ
Re: VS v6 sensor data. No iac? Photos below
Just need to charge the laptop.
I'm sure the data history and the data monitor display do open. Although just before when I tried opening the gauges display, they still weren't opening, even from the acquisition menu. Icons wernt grayed out.
Do you see any thing wrong with any of my sensor data above?
I'm sure the data history and the data monitor display do open. Although just before when I tried opening the gauges display, they still weren't opening, even from the acquisition menu. Icons wernt grayed out.
Do you see any thing wrong with any of my sensor data above?