Convert V6 Netres To V8

[antus]

Thanks for that! I knew I had seen that list somewhere! I'll mirror it here. For the record - thanks to Ludis Langens, pontiacjeff and 1project2many. I'll also add F.

It looks like H is not always 2.0L Turbo Sunbird as its also used on VP V6 here according to Dick's records.

A is for 2.8L 60 deg V6
B is for 2.0L Turbo Sunbird
C is for 2.3L Quad 4
F is for 5.0L Holden V8
G is for 3.8 Buick V6
H is for 2.0L Turbo Sunbird
J is for 3.1L 60 deg V6, both NA and Turbo
K is for 3.3L Olds V6
R is for 5.7L TPI
V is for 3800 Buick V6
*or*
05 is for 3.3L V6 Olds
09 is for 3.1L V6
14 is for 4.3L V6 (Turbo)
19 is for 4.3L 90 deg V6
35 is for 3100 V6
36 is for 3.4L 60 deg DOHC V6

[Six_Shooter]

Yeah, I think that list is geared towards the US market.

[v8-tuning]

Hi all, come across this memcal done by someone for a vn/vp v8
look odd how they have done the resistor mod any thoughts?

[Holden202T]

i don't see any issue with it ?

[v8-tuning]

I thought they were mean to be
on the 2nd last leg of the chip like on page 2
Converting v6 netres to v8 instead this one goes accross
And it's a v6 memcal too never seen it done this way.

[VL400]

What value resistor is it? Its hard to make out all the colours but if its a fairly low value which will do the same job.

[v8-tuning]

7.5 k resistor ,so can be done either way?

[Holden202T]

it looks like one of the legs on the IC has been cut too or is it just me ?

[VL400]

Yeah looks to maybe be cut. A 7.5k resistor would be marginal it if no leg is cut, but if it is works fine as 8 cyl

[v8-tuning]

I checked it and it has been cut,thanks for the replies guys