I have got myself an Innovate MTX-L and am wondering which is the correct/best pin to wire the analogue wideband output into the PCM? The PCM is a VT S1/VS S3 V8 (16234531) running DRRR tune realtime modded by VL400. He suggests it should be the same as other VT PCM's on the B12 injector monitor pin?
Does anyone know of a good source for the pins or even whole ECU plugs? I have a couple of things I want to try and would rather not scrap a harness just to get a few pins.
Cheers,
Troy
Wideband input to VT PCM
-
Helical
- Posts: 152
- Joined: Mon Jul 04, 2011 8:37 pm
- cars: 2000 HSV VS Series 3 Maloo
1995 Holden VS V6 3 seat ute (bunky)
1997 Holden VS S Pak Ute (wreck) - Location: SOR, WA
Re: Wideband input to VT PCM
Nobody?
-
VL400
- Posts: 4991
- Joined: Sun Mar 01, 2009 2:54 pm
- cars: VL Calais and Toyota Landcruiser. Plus some toys :)
- Location: Perth, WA
- Contact:
Re: Wideband input to VT PCM
B12 is the pin to use, its the injector monitor line so you dont need a pin for that as its already in use.
I am sure someone posted a source for pins on here, but couldnt find it
I am sure someone posted a source for pins on here, but couldnt find it
-
Helical
- Posts: 152
- Joined: Mon Jul 04, 2011 8:37 pm
- cars: 2000 HSV VS Series 3 Maloo
1995 Holden VS V6 3 seat ute (bunky)
1997 Holden VS S Pak Ute (wreck) - Location: SOR, WA
Re: Wideband input to VT PCM
Cool.
Still want to find some pins as I want to have a play with a couple of other things...
I did a search too and couldn't find anything and I don't know what the plugs are called to go searching for them on the interweb.
Troy
Still want to find some pins as I want to have a play with a couple of other things...
I did a search too and couldn't find anything and I don't know what the plugs are called to go searching for them on the interweb.
Troy